LG Hanger Journey

[GoodLookingNerd Member Find all posts View Profile Close GoodLookingNerd]

So I got back into hanging yesterday and used the uncut method.

One of my concerns with it tugging on skin a little bit more happened. I did feel pull on the internal penis but not as much as I recalled with my method.

I am using the Alt method and it seems to be working fine. I am only hanging 3.75 lbs right now and may go up every four days. Is this progression too fast? Trying to get back to 7.5 lbs and am willing to take the most pragmatic route.

Advice?

One more thing. Is this taping method as bulletproof as the uncut method? I believe the uncut method to be the ultimate blister proof method but is the Alt method pretty damn secure as well? It kind of feels like it. Like havin a second skin.

[GoodLookingNerd Member Find all posts View Profile Close GoodLookingNerd]

Dude! Another fucking blister.

I typed my message above while I was doing my set. I am really pissed. Waiting a week anf a half to heal and get another one.

Looks like I am doing the uncut method all the way.

Marlon, even this alt method you are prone to blisters.

It is not a huge one but it is noticeable and next to the site of my original blood blister. And the one I had previously was pretty deep.

I just popped and covered in mupirocin ointment. Can I just use the uncut method and hang like that? The blister may be under pressure but there won't be any friction. Is this advisable? I'm asking a question I know the answer to, NO!, but being out of it for this long and getting another blister right back into it is really killing my motivation for this stuff.

I read about people hanging with blisters and have reported as long as pain is not felt, then it is all good.

Please let me as soon as possible because I am planning to hang with the uncut method tonite. Thanks.

Edit: Also, my chamber seems to be getting tighter and harder to insert my penis, hinting at some possible gains. Once I reach that point where I cannot fit in the dome, what are my options? Do I send in the dome or do I purchase a nee one? Only a month of training to buy a new dome isn't the most attractive option if you will.

[Manchild78 Senior Member Find all posts View Profile Close Manchild78]

Check out our blog for photos of the "alternative tape method" for un-cut men. Keep in mind blisters are completely avoidable if you tune into the warning signs. There's another article I wrote on the blog called "Blisters - what to do if you get one and how to avoid them".

L.G. Hanger, LLC

In regards to blisters. Alcoholics or simply drinking alcohol before p.e can easily cause blisters since the skin and body is more dehydrated and easily scarred. So be careful with this as well for heavy drinkers or those that got drunk and decided to do some aggressive workouts.

[Marlon LGHanger Senior Member Find all posts View Profile Close Marlon LGHanger]

Dude! Another fucking blister.

I typed my message above while I was doing my set. I am really pissed. Waiting a week anf a half to heal and get another one.

Looks like I am doing the uncut method all the way.

Marlon, even this alt method you are prone to blisters.

It is not a huge one but it is noticeable and next to the site of my original blood blister. And the one I had previously was pretty deep.

I just popped and covered in mupirocin ointment. Can I just use the uncut method and hang like that? The blister may be under pressure but there won't be any friction. Is this advisable? I'm asking a question I know the answer to, NO!, but being out of it for this long and getting another blister right back into it is really killing my motivation for this stuff.

I read about people hanging with blisters and have reported as long as pain is not felt, then it is all good.

Please let me as soon as possible because I am planning to hang with the uncut method tonite. Thanks.

Edit: Also, my chamber seems to be getting tighter and harder to insert my penis, hinting at some possible gains. Once I reach that point where I cannot fit in the dome, what are my options? Do I send in the dome or do I purchase a nee one? Only a month of training to buy a new dome isn't the most attractive option if you will.

I read your previous post along with this one.... let me be clear, there is no bullet proof tape method that will prevent blisters. Did you read my blog article on "Blisters how to prevent them and what to do if you get one"?
Never hang with a blister or one that is in the process of healing. When you have healed and resume hanging you must drop weight and time by at least 50% and slowly build back up. You must allow that fresh new skin time to become conditioned. If you don't and you try to jump back in at the weight and time you left off at you will give yourself another blister! This is the frustrating part for me, trying to emphasize the need to be patient and not use more weight or time than you are ready for. It took me three full months of dedicated hanging to work my way up from 3 lbs. to 8 lbs.
If at anytime during your hang session you feel a slight itchy or tingly sensation on the tip of your penis, then STOP THE HANG! That sensation is a red flag indicator that you are getting a blister!

Now for chamber fit issues.... If your chamber is getting too tight and you can't fit into it because you have grown. Then I can re-size your chamber provided there is enough wall thickness to work with. If not then a new larger chamber is required. This is why it is really important to measure correctly and give us accurate circumference measurements. You shouldn't be growing out of your chamber in a few months. It took me a full 14 months before I needed to make myself a larger chamber.

[GoodLookingNerd Member Find all posts View Profile Close GoodLookingNerd]

Soooooo....... Kind of scootin back into this thread and usin the LG again. Uncut method all the way.

Right now I am at like 3.75 lbs but moved it up to 4.25 lbs at the end of the set. I am monitoring my itchy sensation like a mofucka.

For right now my strategy is to hang SD as much as possible and then move on to another angle to bring on the intensity.

When I have tape on and everything, I squeeze the base of my penis. The upper shaft and head gets really engorged with blood and I cannot fit my penis when it is engorged like this. I release the grip so less blood is in there and put my head in the dome. I then squeeze the base to make my penis touch the inside of the dome and then roll the sleeve down.

Is it better to have a dome you can go in fully engorged and then you can apply more vacuum onto that? Hope that makes sense. Or is how I am doing it fine for now. You also make more room in the dome if it isn't fitting right anymore right?

Cool, learned and ready to gain.

[arsenal1986 Junior Member Find all posts View Profile Close arsenal1986]

It's really difficult trying to hang with your foreskin retracted, especially if your goal is to hang more than 10 lbs (I tried and failed with the Bib hanger, so I knew it wasn't effective more me). I've been using the LG for about 2 months now and using uncut method wrapping from the start. The best thing is to take your time and never rush into hanging. I'm currently hanging 10 lbs BTC and SD 45-60 mins per set.

[GoodLookingNerd Member Find all posts View Profile Close GoodLookingNerd]

Yeah man. Well I have been doing the uncut method and basically my concern about the method is happening again. Pretty much when I take it off, I have a massive buildup of fluid on the covering foreskin and the stretch I am feeling more on my skin rather than the internal tissue.

For my morning set so far I hung 4.25 lbs uncut method for 30 min but for the next 30 I went back down to 3.0 lbs using the alt taping method. I am just basically looking at this as building tissue maturity and rather hang like this because I really do not want to stretch skin. If cut guys can hang a lot of weight exposing the glans than we uncut guys should too.

I am gonna stick to this for now.

Have a pretty good hang, took some pics.

20170719_153429.jpg
20170719_153503.jpg

[Pub Lunch Senior Member Find all posts View Profile Close Pub Lunch]

Goodlookingnerd

Thank you for this thread - as someone who is also uncut, I am greatly interested in your progress as well as how you overcome issues the foreskin presents

As a quick intro to me - I stopped manual stretching as this tore my frenulum, I moved on to extenders where I did see 0.6 inch growth - I still use one but cannot get enough time in due to never ending frenulum tears so see no more growth. I simply use it for a few hours a day just to feel as if I am doing something whilst I plan what to do next...

...and that is likely the LG hanger. I would like to get one but the fear of blisters, as you found, is off putting and it seems that no matter how people try to avoid it - they still happen. Plus there seem to be issues keeping back foreskin etc.

The foreskin method would appear to protect from blisters but at a cost of less internal stress and so less gains.

My question is - are you using the foreskin method and if so - are you gaining? I hope you are my friend. If you are gaining - are you also getting more foreskin? If you are using the roll back method - have you found a way to stop the blisters? What is your method for keeping back the foreskin? Also - is there a lot of pressure on the frenulum when hanging with the LG??

Finally - did I ask if you have gained? Ha ha! That is the main question really - I have not read of anyone gaining with the foreskin method but if you are then I will probably buy one this week. I am actually after a modest 0.4- 0.6 inch in length and this apparatus probably represents my best chance at achieving that safely. Come to think of it - I have not read many posts of people actually gaining with the LG full stop. Let me know if I am wrong about that.

Please do reply and upate this thread with your progress mate - I am very interested in how it goes.

And good luck with your journey. I hope you get what you are after.

[Marlon LGHanger Senior Member Find all posts View Profile Close Marlon LGHanger]

Goodlookingnerd

Thank you for this thread - as someone who is also uncut, I am greatly interested in your progress as well as how you overcome issues the foreskin presents

As a quick intro to me - I stopped manual stretching as this tore my frenulum, I moved on to extenders where I did see 0.6 inch growth - I still use one but cannot get enough time in due to never ending frenulum tears so see no more growth. I simply use it for a few hours a day just to feel as if I am doing something whilst I plan what to do next...

...and that is likely the LG hanger. I would like to get one but the fear of blisters, as you found, is off putting and it seems that no matter how people try to avoid it - they still happen. Plus there seem to be issues keeping back foreskin etc.

The foreskin method would appear to protect from blisters but at a cost of less internal stress and so less gains.

My question is - are you using the foreskin method and if so - are you gaining? I hope you are my friend. If you are gaining - are you also getting more foreskin? If you are using the roll back method - have you found a way to stop the blisters? What is your method for keeping back the foreskin? Also - is there a lot of pressure on the frenulum when hanging with the LG??

Finally - did I ask if you have gained? Ha ha! That is the main question really - I have not read of anyone gaining with the foreskin method but if you are then I will probably buy one this week. I am actually after a modest 0.4- 0.6 inch in length and this apparatus probably represents my best chance at achieving that safely. Come to think of it - I have not read many posts of people actually gaining with the LG full stop. Let me know if I am wrong about that.

Please do reply and upate this thread with your progress mate - I am very interested in how it goes.

And good luck with your journey. I hope you get what you are after.

I can assure you that blisters are completely preventable, whether you are circumcised or uncircumcised there is no glans protection wrap that will completely prevent blisters. If you go to our blog you can read an article I wrote on "Blisters - how to prevent them and what to do if you get one".

Bottom line is blisters are always the result of trying to use too much weight you're not yet ready for or exceeding a hang time you are not ready for. It can be a combination of both.

Experiment with the various wrap techniques and wraps. Find the one that works best for you. There is no right or wrong.

While at our blog you can take a look of my "before" & "after". There have been gains made by several members who use the LG Hanger. The forum history is there to peruse. I wish there were more users who would post results. I speculate that many simply are not disciplined enough to have a regular routine. Evidence of this is noticeable in the comings and goings of forum member participation. I see guys who are very regular for several months, and then they just disappear. Penis enlargement is difficult! It requires time and dedication that many simply do not have. Just like a New Year's resolution.... what percentage of people actually fulfill their goal?

[GoodLookingNerd Member Find all posts View Profile Close GoodLookingNerd]

@Pub Lunch

So basically I post my progress and stuff over on Matters Of Size. I have a picture log over there showing my progress in the "Routines and Progress" section. Named "It is Now time (pics) ".

I couldn't tell you about straining the frenelum because I had mine cut from a doctor 2 years ago. I started doing some inconsistent PE with the bathmate back then and basically I felt like I was going to snap that mother fucker. So I made up a story and had a urologist cut my frenelum and sew it down so it stays down. I basically have a foreskin that exposes the head fully ever since and do not have to worry about tearing ever. No circumcision because I still want to enjoy sec and want as much sensitivity as possible. That's my input on frenelum.

As for taping, I highly recommend the Alt method. The uncut method just really is pulling on skin and doesn't really give you the expansion of the glans the other methods allow you to experience. You also feel greater pull on your internal tissues with the alt method because again, you are not tugging on excessive skin. You are using the friction of your taped up glans against the dome as well as the sleeve. This contributes to better overall enlargement and I love seeing how expanded my glans get when done with a session. I do base squeezes and edging after a session and my girth especially my glans inflates more and it is wise to take advantage of this state. I suggest just working with the LG hanger by itself for a while and do some edging and base squeezes after set to get some expansion and blood flow back. My routine for now.

And I will show I properly do the Alt method once I heal from my blister. Yes! You heard me I got a blister!

And I will specify why I got a blister, quote from REP support LG thread:

"I use the alt tape method and it works awesome. It was just that the session I just had, there was the smallest gap on the tape that exposed my glans. Just the slightest. I only noticed after my set. I didn't even feel the itchy. Maybe I did, but I was focused on other things while doing my set. Really upset because I was at 6.25 lbs for 2 weeks just to be on the safe side and this is happening. "

The alt method if you tape while pressure at the base to expand the glans and you tape without any open spots and no creases, EVERYTHING IS FLAT!!! I will demonstrate this later. Believe in the alt method. It really is the best taping method. I've pumped up to 25 gs to just warm up my glans and no itchy sensation. I just had the smallest gap that I didn't notice at the beginning and that was just what was needed to cause a fat blister underneath the tape. I now have learned and will make sure that there is no possible space for negative pressure to be expressed onto the glans. I also apply tape downward the shaft and put a girth band on top of that tape so that it adds some slight girth for the sleeve you apply on top. This will aid when your penis gets thinned out and will maintain the vacuum and prevent leakage of the vacuum.

As for gains, yes I was only doing the conditioning routine but I was just about to get to 7.50 lbs today. I started at 7.8 BPEL this March. I got back into it seriously a month and a half ago and did the conditioning routine to this point and I measured with a 90% erection 8.1 BPEL. I have pictures and everything. I am going to start being more active on this thread and will bring over the pics for tutorial purposes and measurements. This was only the conditioning routine and I was entering the stages of using my judgment as to how I would progress through kinesthetic awareness.

I am really bummed out that I have to take a rest due to the blister but when properly set up and going at a good pace, my setup/routine is pretty much blister proof. Just the smallest detail caused it. EVERYTHING HAS TO BE PERFECT! And it is actually pretty easy once you get the hang of it.

I am working with Dr. Ric as well. He gave me advice on basically things I already know but I am interested in his approach to girth. That's later on.

The biggest challenge right now for me to face is that I simply just have to leave my dick alone. I have made thia my ritual and to simply stop is really fucking infuriating. I will be less active over on MOS to be more active here and post pics on my technique. I just like that forum over pegym because people communicate more over there but whatever.

My realistic goals are to get to:

9.0+ BPEL
7.5+ NBPEL
6.5+ MSEG

Dream Goals:

BPEL Really Don't care. NBPEL is what matters.

8.0+ NBPEL
7.0 MSEG

Stats right now:

8.1 BPEL
6.3 NPEL
5.1 MSEG

Major fatpad I know. Currently losing weight.

The LG hanger is no doubt the best hanger. Just make sure your setup is absolutely perfect and I will even post pics on my technique to show. Ok dude. This was a lot but just make sense out the info, I will be around once these blisters fade away and I will demonstrate both correct and incorrect technique.

Marlon is also a pretty cool dude. Had a 45 min. conversation with him on the fone and was making sure everything was properly situated with my device. Strange that we are the same height and that we are both engineers. Well, future engineer here. Long lost bro's haha!

Get a bunch of 3M micrfoam tape and cut out some extra girth bands preferably 1.5 inches just two. And have a sleeve that is at least four inches that is attached to your dome. The standard of the 3.5 they provide is a tad too short. 4.0 is better.

More info later bro. Apologize for the lame grammatical errors and poorer usage of words. Just too tired with all these fucking assignments. Becoming an engineer is not easy. lol

[Pub Lunch Senior Member Find all posts View Profile Close Pub Lunch]

Marlon - mate, thanks a lot. You are correct of course, life happens and peoples desires and priorities change so more often than not we do not get to see or hear of results. I have no doubt the LG can work. People still question penis extenders but I have seen growth - they do work but perhaps it is a case of individual responses - perhaps I am lucky. I never gained from manuals despite about 4 months of dedicated stretching before my frenulum injuries. Anyway, I will likely buy an Lg soon - going to stop the extender completely now. Just do not like the way it feels anymore. May I ask how postage to England works with LG? I imagine a lot of duty /import tax? Do you post as a gift?

Goodlookingnerd - blimey mate - a fantastic post! Many thanks also. Very informative and immensely helpful and the offer to impart such knowledge is needed. Really. So many questions, fears, excitement and unknowns - so it is so appreciated to hear from someone like you. I have a hard time visualising words so assistance/pictures from you would be ever so welcome. I think many people, more than you realise, will read your information with great interest. I will go to the matter of size website and read the information you have posted shortly.

I am sorry to hear of the blister - an absolute pain mate - literally! But you are learning and have learned - that is part of the journey. It cannot be avoided - is essential actually! You are gaining and mate, you are a good size already. Decent length and girth no question. Really. I am 6.6 inches non bone pressed, never actually measured bone pressed because for me it was the visual length rather than the insertable one that I am after. Have between 5.3- 5.4 mid shaft girth. If I can get to 7 - 7.2 inches none bone pressed and 5-6 - 5.8 girth I will have achieved all I want from this. Your goals are more ambitious but good for you - you will get there. Definitely.

Good luck with the studies - an engineer is an incredible career and you wont regret it. 'Hang' in there!

[Marlon LGHanger Senior Member Find all posts View Profile Close Marlon LGHanger]

Marlon - mate, thanks a lot. You are correct of course, life happens and peoples desires and priorities change so more often than not we do not get to see or hear of results. I have no doubt the LG can work. People still question penis extenders but I have seen growth - they do work but perhaps it is a case of individual responses - perhaps I am lucky. I never gained from manuals despite about 4 months of dedicated stretching before my frenulum injuries. Anyway, I will likely buy an Lg soon - going to stop the extender completely now. Just do not like the way it feels anymore. May I ask how postage to England works with LG? I imagine a lot of duty /import tax? Do you post as a gift?

Goodlookingnerd - blimey mate - a fantastic post! Many thanks also. Very informative and immensely helpful and the offer to impart such knowledge is needed. Really. So many questions, fears, excitement and unknowns - so it is so appreciated to hear from someone like you. I have a hard time visualising words so assistance/pictures from you would be ever so welcome. I think many people, more than you realise, will read your information with great interest. I will go to the matter of size website and read the information you have posted shortly.

I am sorry to hear of the blister - an absolute pain mate - literally! But you are learning and have learned - that is part of the journey. It cannot be avoided - is essential actually! You are gaining and mate, you are a good size already. Decent length and girth no question. Really. I am 6.6 inches non bone pressed, never actually measured bone pressed because for me it was the visual length rather than the insertable one that I am after. Have between 5.3- 5.4 mid shaft girth. If I can get to 7 - 7.2 inches none bone pressed and 5-6 - 5.8 girth I will have achieved all I want from this. Your goals are more ambitious but good for you - you will get there. Definitely.

Good luck with the studies - an engineer is an incredible career and you wont regret it. 'Hang' in there!

Cost to ship to UK with United States Postal Service in a medium priority box is right around $65 dollars for a complete Pkg A with ten pounds of weight.
We always try and help customers with keeping costs down, and one way we do that is by putting a low dollar value of no more than $25 on the customs form in order to prevent the import tax of various countries of being so high. We also list contents as "Trophy Hanger" so that there is no indication of what the device really is. Several countries don't allow sexually based items into the country.

Now addressing the "bone press" subject.....
I find that the bone press measurement for me is about 1" different than my non bone press length. However much of that will depend on how thick your fat pad is.
Training with the LG Hanger will enable you to manipulate that inner portion of your penis forward. Over time you will discover that the exit point of your penis from you body will drop lower.

When I am done with a heavy hang session, I always follow up with at least 10 minutes of aggressive hand stretches in order to take full advantage of the fatigue and get the ultimate stretch while flaccid. When I do this I will forcibly take two fingers from my left and and place them on top of my shaft at the base, as I pull hard on my penis with my right hand (my dominant hand) I will push in hard on the pubic bone attachment. This forces that inner portion to come forward. If done correctly you will feel it stretch, and the exit point drop.

[GoodLookingNerd Member Find all posts View Profile Close GoodLookingNerd]

Yeah Pub. I see your goals but more than likely what happens to a lot of guys is that thought begins to proliferate and the thought of "I can gain more" enters the minds of many serious PE'rs. That's not a bad thing, that's good lol. Also your gonna have to do a maintenance routine anyways to maintain your gains if you decide to stop at your goals. If your gonna be doing a maintenance routine, I just see that your time is best spent to keep going on with the routine and really hit those upper echelons of overall penis volume. Get to that ideal 8 x 6 bro. Don't limit yourself man.

And just to reiterate, I really believe in my setup because even after hanging after 1 hour with 6.25 lbs, I would keep the dome on and pull on that fucker up and down. Doing the intense manuals Marlon suggests. I am pretty sure I was putting on some good force way beyond just the normal 6.25 lbs lol. Probably at least 20 lbs of force. And no blister.

But that stupid mistake of leaving that small open gap was the causation of getting a blister. Your glans and upper shaft have to be completely covered with no gaps when taping. Because even though you may completely cover up your glans, if you left creases and open gaps, that may allow that space to emerge a blister in that area. Tape down with a good amount of tightness but not too tight. Need space to expand them glans.

And let me say, seeing your glans after a session is a sight to see. Nice, big and full. My penis is the same length after a session, a tad longer, but getting an erection with the bigger glans really makes your penis look a whole lot bigger. It is a sight to see.

Get a nice chub, semi erection, squeeze the base, tape like how I will show, enter the dome, and pump. Everything will be good. Then go up in weight at a good pace.

Fuck everything else. Literally. Have tried many compression hangers and they are all the same. I don't even want to get into that.

Blister looks like it will take a little while longer to heal. May take another 3 to 5 days. Generous amounts of anti-bacterial ointment being applied 3 times a day.

Also, I actually really suggest getting a frenectomy for your penis. I was just on MOS talking to a bro who just sheared off his frenelum and is in intense pain and has to put PE on hold. I got mine cut like I said last year just avoid something like that and good thing I did. I really believe every guy should get this done. Too many things that can happen even outside of PE too snap that shit up. FACK THAT!

Reason I recommend this is because the alt tape method is going to apply tape over that area and having the frenelum on that spot... IDK. It could work out, but there is still a possibility of a tear. Not trying to scare you bro, just that seeing folks attaining this injury and they weren't even doing stuff that intense brings up some concern.

PEACE!

[GoodLookingNerd Member Find all posts View Profile Close GoodLookingNerd]

Fuck man. Took about a week and a half for new skin to form. Still looks just slightly "raw" or I really don't know how to describe it but yeah. The skin is new lol.

Gonna start up again tomorrow. No more blisters beyond this point. This recent blister formed on the lower part of my glans and not near the meatus which is indicative that I messed up my wrap rather than having too much pressure and/or weight.

I couldn't do manuals because the blister was near my coronal ridge and it irritated the sight. So basically a week and a half decondition break. Don't know if this will limit progress but tbh, 25 lbs SD, 25 lbs fulcrum, 25 bundle, and 25 lbs bundled fulcrum..... I think I'll make gains. just got to work up yo them and of course, blister free.

[dillydally Senior Member Find all posts View Profile Close dillydally]

Cost to ship to UK with United States Postal Service in a medium priority box is right around $65 dollars for a complete Pkg A with ten pounds of weight.
We always try and help customers with keeping costs down, and one way we do that is by putting a low dollar value of no more than $25 on the customs form in order to prevent the import tax of various countries of being so high. We also list contents as "Trophy Hanger" so that there is no indication of what the device really is. Several countries don't allow sexually based items into the country.

Now addressing the "bone press" subject.....
I find that the bone press measurement for me is about 1" different than my non bone press length. However much of that will depend on how thick your fat pad is.
Training with the LG Hanger will enable you to manipulate that inner portion of your penis forward. Over time you will discover that the exit point of your penis from you body will drop lower.

When I am done with a heavy hang session, I always follow up with at least 10 minutes of aggressive hand stretches in order to take full advantage of the fatigue and get the ultimate stretch while flaccid. When I do this I will forcibly take two fingers from my left and and place them on top of my shaft at the base, as I pull hard on my penis with my right hand (my dominant hand) I will push in hard on the pubic bone attachment. This forces that inner portion to come forward. If done correctly you will feel it stretch, and the exit point drop.

Does a lower exit point produce more of a dimple look on the side of the shaft near the exit point? My dimples seemed to be more defined and deeper after doing PE