Cheap Hardgainer 2inch Length, 1.5 inch girth 6-months

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

So would you recommend the item you linked above as opposed to the TPE? I found some on amazon that ships to my country and was still much cheaper then what I could get here such a rip off haha.

I'm gonna try some bottling over the weekend I have a couple bottles at home to try, I think one might be too rigid but was only a few bucks so no harm.

Since I'm a bit smaller, I'd want to fill it up 3/4 or so, basically so the water covers the whole shaft?

No. They do two different things. The tpe keeps you extended, plump and warm all day. You can wear it 24 hours, I don't sleep in it but I could safely. It is a very gentle form of traction. The device above just makes tubing more comfortable. My first tpe lasted 6 months and did the work of both devices. These newer tpe's, can't seem to handle that load for very long. So I take off the tpe and use the other device when tubing.

If I had to choose one, I'd choose the tpe.

[Norwaydude Senior Member Member of the Month Oct. 2018 Find all posts View Profile Close Norwaydude]

Just gotta say big bob. Thanks for putting the fun back in PE for me. Love the bottle thing. And as a bonus I fit into my LG hanger better after the temp gains from the bottle allowing me to hang longer and heavier. (seems I got the wrong size, or actually the correct one after the bottle thing). Dont know if I have gained anything yet though haven't checked. But I enjoy the bottling so it kept me motivated for little longer. well done!

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

Just gotta say big bob. Thanks for putting the fun back in PE for me. Love the bottle thing. And as a bonus I fit into my LG hanger better after the temp gains from the bottle allowing me to hang longer and heavier. (seems I got the wrong size, or actually the correct one after the bottle thing). Dont know if I have gained anything yet though haven't checked. But I enjoy the bottling so it kept me motivated for little longer. well done!

Thanks Norwaydude. That means a lot coming from a dedicated senior member. I feel the same way about it. Bottling is easy, awesome and cheap. I do kegels while in the bottle and squeeze in different direction to move the dent around. Edging/clamping/ulis immediately afterwards helps cement the gains from the hot pump. Then I repeat with more hot water. When I'm done with my session, I strap on my tpe or my tubing for traction and I'm on my way.

I like to get up early and start my day with it. If I have time at the end of the day for a short bout I will.

[monday Junior Member Find all posts View Profile Close monday]

Hey bigbob you might of answered this before but I just want to get it clear. How long is the duration you do the tubing/rubber band at a time and how many times a week, and does it cause any numbing during your session?

The reason I ask is since I have a silicone Tpe and a regular rubber band and not the one that has a plastic hook, which you use. I need to use a cable clamp at the base of my unit to keep the tpe intact. It's not ideal and needs to be taken off every 7-10 minutes to avoid numbing.

I'm thinking about ordering a cheap version of the phallosan for 30 bucks off aliexpress. What's your thoughts on this?
I really want to get the tubing part right since my goal is length atm.

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

Hey bigbob you might of answered this before but I just want to get it clear. How long is the duration you do the tubing/rubber band at a time and how many times a week, and does it cause any numbing during your session?

The reason I ask is since I have a silicone Tpe and a regular rubber band and not the one that has a plastic hook, which you use. I need to use a cable clamp at the base of my unit to keep the tpe intact. It's not ideal and needs to be taken off every 7-10 minutes to avoid numbing.

I'm thinking about ordering a cheap version of the phallosan for 30 bucks off aliexpress. What's your thoughts on this?
I really want to get the tubing part right since my goal is length atm.

I tubed for 1-2 hours at time in each of four directions down-left, up-right, down right, up-left for a total of about 8 hours a day. I would go in one direction until the tendon starting screaming at me, then I'd loosen the tension or change directions. I would try to go everyday, but I listened to my body. If I was still hurting from the day before, I just went with the tpe and no tube. Avoid pain at all costs.

I was always in the tpe if I was not tubing, bottling or sleeping in fowfer position. You want to heal in an extended state.

As for the phallosan knock off, I don't know. I can tell you I have tried 2 knock-offs, one being an imitation phallosan, and it lasted about two weeks. Maybe someone can direct you to a good one, but I ignored the warnings here and tried a cheapy and was disappointed as everyone predicted.

I used stuff I already had when I was experimenting. Knowing what I know now, and I didn't want to lay out money for a phallosan, I would buy:
https://www.walmart.com/ip/Planet-Fi...d8&athena=true
and this:
https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1

and of course a tpe and bottle.

I know everyone wants the length, myself included. However, I did not show any length gains until I had a bunch of girth gains. I know that is unusual. My recommendation is to bottle or bathmate as well. It reaches temperatures the tpe and tubing cannot reach which dramatically increases blood flow. Like hot yoga, you reach stretches you cannot normally reach. If you go straight from a botteling session, into a tpe/tubing/phalosan session, its a really good stretch.

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

Hey bigbob you might of answered this before but I just want to get it clear. How long is the duration you do the tubing/rubber band at a time and how many times a week, and does it cause any numbing during your session?

The reason I ask is since I have a silicone Tpe and a regular rubber band and not the one that has a plastic hook, which you use. I need to use a cable clamp at the base of my unit to keep the tpe intact. It's not ideal and needs to be taken off every 7-10 minutes to avoid numbing.

I'm thinking about ordering a cheap version of the phallosan for 30 bucks off aliexpress. What's your thoughts on this?
I really want to get the tubing part right since my goal is length atm.

So I've created a new tear in a tpe. They just don't make em like they used to. So I'm trying to keep my tpe intact, just like you. As always, I'm reusing. I had bought this:https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 to make tubing much more comfortable. I'm now wearing that over the tpe to stop it from tearing further comfortably. It does NOT cause numbing and is perfect for the tubing to tie to/wrap around.

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

So over the last two weeks, I have tpe-ed everyday, bottled 4 times and banded 4 days. I do fowfers at night a couple times a week. I'm not in any rush, just maintaining with a little hope for a bit more length.

My measurements are still 8 bpel x6.5meg which is an increase over the slight loss in girth I had shown. I'm back to my peak.

One tip, when you bottle, some times you get a crease in the bottle, that creates a hole and you lose vacuum. I have tried different glues. Often duct tape will do the the trick, but not always. I got one of the holes the other day where duct tape wouldn't work. I was chewing gum, so I put a little gum on the bottle and wa-la, vacuum restored. I put duct tape over the gum so I wouldn't get gum on my hands when I bottled. Worked like a charm.

[Norwaydude Senior Member Member of the Month Oct. 2018 Find all posts View Profile Close Norwaydude]

So over the last two weeks, I have tpe-ed everyday, bottled 4 times and banded 4 days. I do fowfers at night a couple times a week. I'm not in any rush, just maintaining with a little hope for a bit more length.

My measurements are still 8 bpel x6.5meg which is an increase over the slight loss in girth I had shown. I'm back to my peak.

One tip, when you bottle, some times you get a crease in the bottle, that creates a hole and you lose vacuum. I have tried different glues. Often duct tape will do the the trick, but not always. I got one of the holes the other day where duct tape wouldn't work. I was chewing gum, so I put a little gum on the bottle and wa-la, vacuum restored. I put duct tape over the gum so I wouldn't get gum on my hands when I bottled. Worked like a charm.

Hey! Great tip, i just wore out to of my favourite bottles. So i will try the gum solution. Really love the diy aspect of this thread! 👍🏻

[shaneo22 Senior Member Find all posts View Profile Close shaneo22]

Hey bigbob, I got those TPE condoms you linked to a while ago, they feel really great to wear, like really nice haha. They almost feel too big though as I'm a little small, just to be clear you bunch the condom up, so your tip touches the tip of the condom then just roll it down, so you end up with some leftover condom?

I was looking for some resistance bands and is this pretty much what you are using? https://www.bedbathandbeyond.co.nz/P...hoCMOAQAvD_BwE

I was gonna get into this a while ago but moved in with my girl who moved overseas to be with me so have had different priorities, but just the feeling of been in the TPE makes me want to get into it.

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

Hey bigbob, I got those TPE condoms you linked to a while ago, they feel really great to wear, like really nice haha. They almost feel too big though as I'm a little small, just to be clear you bunch the condom up, so your tip touches the tip of the condom then just roll it down, so you end up with some leftover condom? I was looking for some resistance bands and is this pretty much what you are using? https://www.bedbathandbeyond.co.nz/P...hoCMOAQAvD_BwE I was gonna get into this a while ago but moved in with my girl who moved overseas to be with me so have had different priorities, but just the feeling of been in the TPE makes me want to get into it.

Congrats on the gf. Those should work...one note though, they look like they have metal carabiner....mine were plastic. So I don't know how how that will play.

Anyone else on the thread using bands with metal carabiner? If so, could you share your experience?

You may want to try something like this on top of the tpe for comfort:https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

Hey bigbob, I got those TPE condoms you linked to a while ago, they feel really great to wear, like really nice haha. They almost feel too big though as I'm a little small, just to be clear you bunch the condom up, so your tip touches the tip of the condom then just roll it down, so you end up with some leftover condom?

I was looking for some resistance bands and is this pretty much what you are using? https://www.bedbathandbeyond.co.nz/P...hoCMOAQAvD_BwE

I was gonna get into this a while ago but moved in with my girl who moved overseas to be with me so have had different priorities, but just the feeling of been in the TPE makes me want to get into it.

Sorry I didn't answer your first questions. I did tip to tip so there is some rolled up at the base. My first tpe was 7 inches, and I started well short of that, so I had to leave some rolled. Now I use the whole length of the thing. I'm not sure it matters though, it just felt like I had better traction tip to tip.

[Norwaydude Senior Member Member of the Month Oct. 2018 Find all posts View Profile Close Norwaydude]

Hi Bob, lately i got some bruising while bottling. Have you had any? You know a way to avoid it?

[Norwaydude Senior Member Member of the Month Oct. 2018 Find all posts View Profile Close Norwaydude]

And by the way, i have seen how my dick would look like at 6 inch girth. (Temp gains who dissappear prettty fast but still.. an awsome thing to see! :-D)

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

Hi Bob, lately i got some bruising while bottling. Have you had any? You know a way to avoid it?

I don't remember any bruising. That might indicate two much pressure. I'd put it in a tpe and give it rest for a day or so...till the bruising heals. You might want to try smaller dents/less vacuum/more water with the bottle. The key is hot water, long duration, right size pressure. You should not need to bruise to make gains.

[bigbob23 Senior Member Find all posts View Profile Close bigbob23]

And by the way, i have seen how my dick would look like at 6 inch girth. (Temp gains who dissappear prettty fast but still.. an awsome thing to see! :-D)

Yeah its awesome. Be sure to uli/manual clamp/edge to try to get as hard as you can after the bottle. When you're done put on the tpe. It will keep it plumper and fatter as it heals. The longer you are in plump state, the quicker the girth gains.