REP Support for Bathpump.com - Q & A

[Lucas BP Rep Official BathPump Representative Find all posts View Profile Close Lucas BP Rep]

Hi Lucas, I saw a video when a person used X30 xtreme with a hand pump and he was pumping a lot. But there was 50% water and 50% air in the tube. Should it be like this? I have X40 and the tube is almost full with water and very little air. I'm just curious about it and does this both pump work the same way and give the same results? I thought that one should avoid air in the tube?

Hello Scandinavia,

This is a question that often arises, I am curious if you saw this video on Youtube or some other public video posting website? If so unfortunately, any person can post a video claiming to be properly using the product. Normally, you should not see a great amount of air in the tube, especially not 50%. You will get the best results by avoiding a lot of air, minimal amounts will be fine.

[Lucas BP Rep Official BathPump Representative Find all posts View Profile Close Lucas BP Rep]

Ah, yeah. That got it. Bloody hell you weren't kidding about the force. These are some well put together things.

Hey eli,

I apologize that I missed the follow up on your thread. It seems that Pro gave you the answer you were looking for, they are well put together as you stated. If you have any more questions please feel free to ask on here.

Happy pumping

[Scandinavia Senior Member Find all posts View Profile Close Scandinavia]

Hello Scandinavia,

This is a question that often arises, I am curious if you saw this video on Youtube or some other public video posting website? If so unfortunately, any person can post a video claiming to be properly using the product. Normally, you should not see a great amount of air in the tube, especially not 50%. You will get the best results by avoiding a lot of air, minimal amounts will be fine.

Thanks for answer Lucas. I found this video on a website when I was googling about Bathmate. I hope it's ok that I link to the page here: Bathmate Xtreme. You have to scroll down a bit, it's the third video on the page.


The reason for asking is because I have an X 40 without a pump and I fill it with water as much as possible and most of the water stay in the tube even when I pump. But in the video the guy have a hand pump and pump out lots of the water so it's much more air in the tube. I thought that it was something different with the Bathmate xtreme when I saw the video?

Just to clarify, I know that as much water as possible should be in the tube with Bathmate and that's the way I use it. But with Bathmate xtreme it seem that it is more air in the tube.

[popol5169 Senior Member Member of the Month Nov 2014 Find all posts View Profile Close popol5169]

He doesn't pump out lot of water, I think it's what gets stuck in the hose, otherwise there is quite a lot of air simply because he loses a good amont of water when it puts it on.
By the way you can see at the end of the video his girth barely changed at all.
The hand pump is supposed to add pressure (you most likely don't need it).

[Scandinavia Senior Member Find all posts View Profile Close Scandinavia]

Okay, he have to little water in the tube when he start/puts it on. I was just curious if there was a "combination" of air and water pumping.

[kong15 Senior Member Find all posts View Profile Close kong15]

2 weeks in and I'm having great results. Very motivated to use this for the long haul. Going Bathmate alone so i know wheather it's legit or not!!!

[popol5169 Senior Member Member of the Month Nov 2014 Find all posts View Profile Close popol5169]

Okay, he have to little water in the tube when he start/puts it on. I was just curious if there was a "combination" of air and water pumping.

I think I understood what the problem was and how it is supposed to work. As he was standing and the bathmate was horizontal, air was above the valve level (at least partly) when water was against it, so when he used the hand pump he create vacuum by expelling water ( since it was the water which was on the other side of the valve). If you're lying down air will be against the valve and therefore air will be expelled out of the cylinder.

[elijohnson Senior Member Find all posts View Profile Close elijohnson]

Hey eli,

I apologize that I missed the follow up on your thread. It seems that Pro gave you the answer you were looking for, they are well put together as you stated. If you have any more questions please feel free to ask on here.

Happy pumping

Thanks, I did have another couple q's here

https://www.pegym.com/forums/penis-d...tml#post996147

Basically what would a full routine look like, would the x30 be better for a curve, think that was it.

[Lucas BP Rep Official BathPump Representative Find all posts View Profile Close Lucas BP Rep]

Hello Scan,

What makes the Bathmate so great, is how it utilizes the benefits of pumping with water. Air is spongy and compressible, which means if you create a vacuum inside a tube with air, the air that remains simply spreads thinner inside the tube. This means the penis can expand unevenly, creating possible bending and bulging of the penis.

Water on the other hand is incompressible, so when water is pumped from a sealed tube around the penis, the water cannot spread out to help fill the gap and that means the penis must expand to fill the full volume of water removed. As water is incompressible it forms a solid cushion around the penis,thus water allows for uniform expansion without bending or bulging. This would be another reason that you would want to keep as much water in, I would recommend always filling the pump up to the very max level and then you should be fine. This would go for all pumps Hercules, Goliath, X30, X40

I believe popol (thank you), has also pretty much clarified the video for you as well.

[Scandinavia Senior Member Find all posts View Profile Close Scandinavia]

Thanks Lucas, it's always nice to learn more about PE and pumping in general because pumping is kind of new for me (for now).

[kong15 Senior Member Find all posts View Profile Close kong15]

Lucus-I bought bathmate x40 and received it on 12/22/14 and everything was working great until today. The valve now doesnt hold any pressure and it pops out from the top higher than it ever had? Please help me as I have been loving it and making great progress from this amazing product. I dont want to lose the ground i've gained. HELP!!!

[kong15 Senior Member Find all posts View Profile Close kong15]

its basically spitting out a ton of water and then a ton of air is getting in

[Lucas BP Rep Official BathPump Representative Find all posts View Profile Close Lucas BP Rep]

Hey Kong,

When you are using the pump, does the valve stay locked? Or is it popping to open? I have a couple of options for you to try, starting with

1) The valve on the X30s and X40s can become distorted if left in the locking position. When not in use, the valve should always be left in the neutral position. To fix this - allow valve to sit in neutral position for 5-10 minutes and it should form back to its original shape.
2) Always make sure to switch the valve to the locked position when the desired suction has been achieved, to hold in the level of pressure.

Let me know your outcome,

Lucas

[kong15 Senior Member Find all posts View Profile Close kong15]

No it will stay locked when moved to the sides, but when i pump in the open position it spits a ton of water out and then sucks in a ton of air instantly. So locking and holding pressure isnt the issue, its getting to the pressure i need. The black switch actually appears to be coming out further than it normally does. It's not creating any pressure at all when I pump. Tried the first and always do the second...still not working. Basically it just spits water and creates no pressure. What can be done to fix this? Do i need replacement parts after just 2 weeks?

[Watching11919 Junior Member Find all posts View Profile Close Watching11919]

I've been using the hercules since mid November and it seems like it's working. My dick looks and feels bigger, but I can't say for sure if it actually did get bigger. It could be a placebo effect coupled with me recently shaving.

My routine is 10-20 minutes a day, 5 days a week and that's it. I'm thinking about incorporating the JP90 thing as well. I plan on continuing my routine for 6-months to a year and won't measure until I'm finished. I think I was at 5" EL and 4" EG before I started, my goal is 5.5" EL and 5" EG.

Hopefully all of this pays off and is permanent. I've done a lot of researching on whether or not the bathmate actually works, and I haven't really found any evidence to believe that it does.

I'll come back with an update as to whether or not it all worked out.