REP Support for Bathpump.com - Q & A

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

Yes- sadly, just not ready to move up in size yet. It seems the better we do with filling the pump, the more we'll get out of it. I went out and bought an X30 Extreme and it did the trick. So, I now own 3 Bathmates- one Hercules, one X40 and one X30 Extreme. The Extreme will pull your hooey off if you aren't careful. I've kept my X40, with the hope and confidence that I'll someday need the bigger pump.

Regarding the silicone sleeve, I remember before the X series came out, some people were Jerry-Rigging generic pump sleeves and gluing them into their pumps. It seemed tedious and I don't know that it was ever a good solution for anyone, but a few guys remarked that they were happy that it kept their dinkuses out of the gaiters.

One question I have- is there a way to interchange valves between models? If so, I could use my X40 as an Extreme when the time comes.

Grownow,

And I missed the other two parts of your message...though there isn't an official pump sleeve for the bathmate, you can find ones sold on amazon.com and other locations. I've had a few people speak positively about them (be sure to match the sleeve size to the pump opening size) and if that helps, definitely worth doing.

As for the valves, they are not interchangeable between models unfortunately.

Harrison

[iceage Junior Member Find all posts View Profile Close iceage]

Newbie to the forum and a newbie to PE. I was looking at the Penomet and Bathmate and have decided to go for the bathmate. Different sites have different measurement recommendations can you help me out here please. My BPEL is 7.5 "(nbel 7.2'') and girth is 5.5 " I think i fall in between the X30 and X40 ? I also rarely take baths, mostly showers so is the strap needed or is there enough suction. Also can these be used outside the bathroom sitting at a computer or couch or is there leaking ? Thanks D

[aplay69 Senior MemberPEGym Hero Find all posts View Profile Close aplay69]

Sorry to hear the repair job didn't take. When choosing your next model, keep in mind that the Goliath lives up to its name - it's really huge. Choosing pumps that are much bigger than needed (i'm not sure of your size, but i'm saying this as a general rule) often makes getting a good seal/suction harder, and some users have issues with having their balls sucked into the pump. So, when picking between X30, X40 and Goliath, definitely consider those factors.

Cheers,
Harrison

I've decided to go with the 40x Extreme. I wanted to go with the Goliath, but my wife assured me that if I got that big I'd be sleeping alone. At least with the 40x Extreme once I create a good seal I can use the ball pump instead of continuously pumping to my max.

[danes_game Junior Member Find all posts View Profile Close danes_game]

Harrison, I PM'ed you about an order, something I'm confident that you can answer in a few seconds. Thanks in advance.

[aplay69 Senior MemberPEGym Hero Find all posts View Profile Close aplay69]

Newbie to the forum and a newbie to PE. I was looking at the Penomet and Bathmate and have decided to go for the bathmate. Different sites have different measurement recommendations can you help me out here please. My BPEL is 7.5 "(nbel 7.2'') and girth is 5.5 " I think i fall in between the X30 and X40 ? I also rarely take baths, mostly showers so is the strap needed or is there enough suction. Also can these be used outside the bathroom sitting at a computer or couch or is there leaking ? Thanks D

You can comfortably fit up to 8" in the 30x model. With your length being what is in a short time you will out grow it. I would recommend going with the 40x model.

If your primary usage of the device will be in the shower, then yes, by all means use the strap. When the 40x is filled with water it can become quite heavy. Without the strap it will hang cause you to lose your seal. The strap helps to keep it in place. Besides, it's difficult try to shower while using one hand to hold the pump and the other trying to clean yourself. You have to be an octopus to accomplish that. Believe me I've tried.

Yes you can use the pump outside of the shower. I've done it many times. Just make sure that your seal is tight and not leaking water. Limit your movements. It doesn't take much to break the seal if you are moving about. Carry a towel with you in case of an accident.

I'm curious, the maximum recommended usage of the pump is 20 minutes, how long do you plan on using it?

[aplay69 Senior MemberPEGym Hero Find all posts View Profile Close aplay69]

Regarding the silicone sleeve, I remember before the X series came out, some people were Jerry-Rigging generic pump sleeves and gluing them into their pumps. It seemed tedious and I don't know that it was ever a good solution for anyone, but a few guys remarked that they were happy that it kept their dinkuses out of the gaiter.

I am one of those guys who uses a universal pump sleeves. Mine is a latex one that I purchased off ebay. I use it to (as you state) keep my balls from being sucked up into the pump. It works 98% of the time. The other reason is that I enter the pump complete flaccid. The opening of the 40x is huge. Sometimes I think it was designed for King Kong. The pump sleeve allows me to reduce the size of the opening so that I can create a good seal on the 1st or 2nd try. There were times where it took me over 20 minutes to get a good seal. Many will question the method. I can tell you that it works.

[BigO AdministratorPEGym Hero Find all posts View Profile Close BigO]

For those inquiring about a sleeve, there's a couple good threads about using universal sleeves that may be of interest to you.

https://www.pegym.com/forums/gym/307...-bathmate.html
https://www.pegym.com/forums/penis-d...lp-please.html
https://www.pegym.com/forums/penis-d...te-sleeve.html

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

Newbie to the forum and a newbie to PE. I was looking at the Penomet and Bathmate and have decided to go for the bathmate. Different sites have different measurement recommendations can you help me out here please. My BPEL is 7.5 "(nbel 7.2'') and girth is 5.5 " I think i fall in between the X30 and X40 ? I also rarely take baths, mostly showers so is the strap needed or is there enough suction. Also can these be used outside the bathroom sitting at a computer or couch or is there leaking ? Thanks D

Welcome to PEGym and to penis enhancement, iceage! As for your size, it somewhat depends on your goals. If you're looking for just a little more, the X30 may suit you, but if you want to push past the 7.5 BPEL, I think you should go with the X40. You're large enough that it won't be too large for you (having too space makes generating appropriate pressure tougher, and some people have issues with testicles slipping in) and it will allow you to target higher gains. You can see our size chart here: Bathmate Models ? Bathmate Clearance

You don't need a strap to use the pump in the shower, though many users do prefer it. You'll just have to hold the pump with one hand (that's actually been my preference). Though you can use the pump without water, I wouldn't suggest filling it with water and then using it outside of the bathroom - if you lose the seal you'll end up dumping water onto your couch or chair. The shower is your best bet.

Hope that helps!
Harrison

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

I've decided to go with the 40x Extreme. I wanted to go with the Goliath, but my wife assured me that if I got that big I'd be sleeping alone. At least with the 40x Extreme once I create a good seal I can use the ball pump instead of continuously pumping to my max.

Have to keep the wife happy! Enjoy the X40 and let me know if you have any other questions.

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

Harrison, I PM'ed you about an order, something I'm confident that you can answer in a few seconds. Thanks in advance.

Answered via PM!

[iceage Junior Member Find all posts View Profile Close iceage]

Welcome to PEGym and to penis enhancement, iceage! As for your size, it somewhat depends on your goals. If you're looking for just a little more, the X30 may suit you, but if you want to push past the 7.5 BPEL, I think you should go with the X40. You're large enough that it won't be too large for you (having too space makes generating appropriate pressure tougher, and some people have issues with testicles slipping in) and it will allow you to target higher gains. You can see our size chart here: Bathmate Models ? Bathmate Clearance

You don't need a strap to use the pump in the shower, though many users do prefer it. You'll just have to hold the pump with one hand (that's actually been my preference). Though you can use the pump without water, I wouldn't suggest filling it with water and then using it outside of the bathroom - if you lose the seal you'll end up dumping water onto your couch or chair. The shower is your best bet.

Hope that helps!
Harrison

Thanks for the reply ! I should have stated my goals , i would like to aim for 8 x 6 or maybe 8.5 x 6 would the x30 be a little tight for that or just go with the x 40. Thanks again sounds like the x40 has quite a bigger opening . i guess with some practice the balls being sucked in can be avoided ?

thanks in advance D

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

Thanks for the reply ! I should have stated my goals , i would like to aim for 8 x 6 or maybe 8.5 x 6 would the x30 be a little tight for that or just go with the x 40. Thanks again sounds like the x40 has quite a bigger opening . i guess with some practice the balls being sucked in can be avoided ?

thanks in advance D

iceage,

The X40 does have a bigger opening. One option to help narrow that opening is to try a universal sleeve. Here are some threads that working_for_it, one of the moderators here, posted recently with regard to universal sleeves:

https://www.pegym.com/forums/gym/3073...-bathmate.html
https://www.pegym.com/forums/penis-de...lp-please.html
https://www.pegym.com/forums/penis-de...te-sleeve.html

So, try the X40 and if the opening creates a problem, try out a sleeve and see if that helps.

Cheers,
Harrison

[ProGasmDave Senior Member Find all posts View Profile Close ProGasmDave]

I'm currently 6.5 * 5.3 and have been using the X40 for the last month with no ball-suckage problems whatsoever

[Jon79 Junior Member Find all posts View Profile Close Jon79]

Hi Harrison, I have recently purchased an x30 but am having problems with it. I was circumcised a few yrs back and have lost a lot of skin from this, when I use the bathmate, although my penis inflates girth wise it does not get anywhere nr erection length size( 7 inches).It is pulling up the skin and scotum making it painful and I have to deflate, I don't think it is liking to be stretched this way. There were no warnings this could be a problem. It simply won't pump even to my normal erect length let alone bigger. Could I just use it to extend the girth perhaps or is it a list cause ?

Thank you for your time, Jon.

[iceage Junior Member Find all posts View Profile Close iceage]

iceage,

The X40 does have a bigger opening. One option to help narrow that opening is to try a universal sleeve. Here are some threads that working_for_it, one of the moderators here, posted recently with regard to universal sleeves:

https://www.pegym.com/forums/gym/3073...-bathmate.html
https://www.pegym.com/forums/penis-de...lp-please.html
https://www.pegym.com/forums/penis-de...te-sleeve.html

So, try the X40 and if the opening creates a problem, try out a sleeve and see if that helps.

Cheers,
Harrison

Ok thanks for your help, I think I'll go for the X40 Xtreme , hopefully my first and last pump i need to buy.