Phallosan Forte Review

[swavey Member Find all posts View Profile Close swavey]

How long have you been using the Phallosan? I'm pretty happy with the device too. I've seen about a 1/4" of erect gains that I attribute to the Phallosan. I believe it's working, but I feel like 1/4" is still on the cusp of a measurement margin of error. Once I pass 1/2" I'll be comfortable saying definitively that it's worked for me.

im the same way. before my ruler broked i measured as a quarter inch above but im scared to even call it definite as it might be error. im waiting until march for the 2015 bigger challenge to measure again. hopefully ill be comfortable enough to say its cemented then...

weirdly, my need to have sex or masturbate has gone down dramataically, i am no longer as horny at all. May be stress levels though.

[pudendal Senior Member Find all posts View Profile Close pudendal]

New and Improved Protector Caps:

Julian sent me a new tension clip to replace the old one that had started to ride up over the lip of the bell and onto the green part of the pump. Despite repeated requests for a tracking number, the package arrived today unbeknownst to me while I wasn't home and my roommate awkwardly had to sign for the "intimate/confidential" marked envelope. I wasn't really happy about this situation, but I did appreciate the contents of the package. The new clip seems to have solved my problem, and Julian threw in a set of protector caps. I had been using the old original protector cap that came with my system and wrote a post several months back complaining that the cap wasn't long enough to adequately cover my coronal sulcus and protect the skin there from the vacuum (https://www.pegym.com/forums/penis-d...tml#post922708). Maybe it's just that my old cap had become deformed from all the hours of use, but the new caps seem to be longer and to do a better job constricting my glans to fit inside the bell. So despite my frustration about roommate embarrassment, I'm placated by the nice, new, freebie protector caps.

[NeverEnough9 Senior Member Find all posts View Profile Close NeverEnough9]

I still can't decide between the PF and the PMP. I have done jp90, manuals, as well as about 6 months hanging (up to 15lbs 3 hours/day) and could never feel fatigue which is why I'm considering a device that can be worn longer under lighter tension. Also not sure if a vac extender would be more affective than an ads. Anyone have any suggestions?

[swavey Member Find all posts View Profile Close swavey]

PF i believe can be worn longer, but PMP looks like it might give a much harder stretch. i only actually have the PF though. just from what ive heard and looks

[pudendal Senior Member Find all posts View Profile Close pudendal]

I still can't decide between the PF and the PMP.

I only have experience with the phallosan so I can't speak to the relative merit of the PMP, but I'm happy I have the phallosan. The only feature of the PMP that I could foresee you missing is the versatility to use the vacuum attachment with a rod-based extender in addition to the belt system. I made a couple DIY modifications so that I can switch between the belt and my old rod-based extender using the phallosan bell. You could do the same with an inexpensive ebay generic extender and a Velcro strap to attach the phallosan bell to the cradle. Otherwise, I think the phallosan might be a higher quality product and it has the benefit of the customer service Julian offers on this forum.

[pudendal Senior Member Find all posts View Profile Close pudendal]

Faulty Springs in Replacement Tension Clip:

My old tension clip had started to slip up over the lip of the bell and onto the pump. Julian sent me a replacement that resolved that issue, but I soon noticed a new problem. The springs inside the pistons on the new clip had a tendency to push through the holes on the threaded caps that hold them in place. To my surprise, when I opened up the pistons I found that the new springs are slightly narrower in diameter as compared to the springs from my old clip. Is this because the hours of use on my old springs caused them to become slightly uncoiled, or (as I suspect) they've changed the springs? My old tension clip never had this issue with the springs pushing through the holes during all of my months of use but it happed several times during my first couple days with the new clip. After I noticed the difference in size, I just switched out the new springs for the old ones. This seems to have resolved the problem, but I wonder if anyone else is experiencing the same thing and how they could resolve it if they didn't have the old springs to use as replacements. If phallosan has switched to using different springs, I'd suggest they should return to the original size.

[Tamora Retired Super Moderator Member of the Month Aug 2015 PEGym Hero Find all posts View Profile Close Tamora]

...I wonder if anyone else is experiencing the same thing and how they could resolve it if they didn't have the old springs to use as replacements...

An appropriate sized washer between the threaded cap and the spring should do the trick.

[TinyPeter Member Find all posts View Profile Close TinyPeter]

Where did you get your Phallason? phallosan.com or phalloextender.com? Why the heck is there two sites!

[pudendal Senior Member Find all posts View Profile Close pudendal]

An appropriate sized washer between the threaded cap and the spring should do the trick.

That's a good idea, but the new springs are so tight on the traffic light posts that anything with a narrower hole wouldn't leave a lot of clearance for the posts to slide through.

[pudendal Senior Member Find all posts View Profile Close pudendal]

Where did you get your Phallason? phallosan.com or phalloextender.com? Why the heck is there two sites!

I got my device on the main phallosan site about a year and a half ago before the other site was created. As I understand it, the phalloextender site is a partnership with the PEGym forum where they offer some kind of special deals with your purchase.

[pudendal Senior Member Find all posts View Profile Close pudendal]

MOS developing phallosan-style device?

Funny, I just came across the pictures of my DIY XL bell and rod-extender adapter in a post over on the MOS forum in a thread about a new vacuum extender prototype they are developing:

MoS All Day Stretcher / All Night Stretcher! Feedback & Beta-Testers Needed! - Page 11

They give attribution to my PEGym username for the first phallosan mod but seem to believe the second came from someone else. Anyway, it was just a little surreal to find my own pictures in Google image search results cropped and posted to another website, but it's nice to think someone might have found my ideas helpful. The post about my modifications is from a user suggesting that their vacuum bells should be compatible with a rod extender, and a reply adds that they wish an XL bell size was an option. If they actually are developing a new phallosan-style device for mass production as described in the thread, it will be interesting to see what they come up with.

[OT457 Junior Member Find all posts View Profile Close OT457]

Anyone else been having issues with customer service? I ordered something three weeks ago and haven't recieved it yet. I can't get a reply from Julian, the email that sent me a receipt, the email on the website and I called the listed number on the website. Can't get ahold of anyone. What gives?

[pudendal Senior Member Find all posts View Profile Close pudendal]

Anyone else been having issues with customer service?

I've seen a lot of posts complaining about the lack of response from phallosan customer service, and it has been a while since Julian posted on the support thread. I had a PM exchange with Julian about a month ago and he sent me a replacement tension clip, but even at that time I couldn't get a response from the "service" phallosan email address or a tracking number for the delivery. Maybe they are having some turnover on their staff or trouble keeping up with an increase in demand for the product?

[Tamora Retired Super Moderator Member of the Month Aug 2015 PEGym Hero Find all posts View Profile Close Tamora]

...Maybe they are having some turnover on their staff or trouble keeping up with an increase in demand for the product?...

Or maybe they're just friggin' useless!

[OT457 Junior Member Find all posts View Profile Close OT457]

Yeah, I don't know what's going on. I guess I'm fucked out of $40 bucks. I'll give them a month before I start telling people not to order from them.