REP Support for X4 Labs Penis Extender - Q & A

[X4Labs Official X4Labs Reprensentive Find all posts View Profile Close X4Labs]

What is your recommended time for using it (for advanced, when you used it for a couple of months)? I saw SG recommedning 12 hours a day, personally I cant have that much mental pressure of always having to using it. Another extender, PM, they recommended 3-6 hours, or the people in thier trial had been using it for that time.

Do you put the extenders "downwards" when using it, so its discret when using baggy cloths?

Is it comfortable, easy and relaible? I dont want to change parts because it fails

Hi Swapzor, finding 12 hours every single day to wear a penile traction therapy device can be next to impossible for most people. That being said, I believe even if you did have the time to do so, it may be a tad excessive. We believe that users should take time to recover from the therapy.

Looking at our in-house clinical trials, most users that have experienced successful results have reported wearing the device between 4-8 hours a day 4-6 days a week.

As for the angle, it really doesn't make much of a difference in results as much as it makes in comfort. Since the penis naturally hangs downwards, most users wear it slightly pointed down. If you are able to wear it under baggy clothes and feel comfortable, more power to you. It means you would be able to wear your device in more scenarios which can only help.

Just remember, safety comes first. Hope this helps!

[X4Labs Official X4Labs Reprensentive Find all posts View Profile Close X4Labs]

I'm having issues with locking my penis in the extender. Either it slides off or isn't tight enough. Tried both ways to fasten my member with and without the sponge and same results. I can't find the quad extender on the website. Would I still be able to get it with the pegym promo? If not how much is it ?

Hi ez.hackster,

You are not alone. Due to the shape of some penises, users can experience varying degrees of slippage with a penile traction therapy device. That is what makes our InfiniteFit Quad Support System so groundbreaking. It provides more stability but all the same comfort and more.

X4 Labs InfiniteFit Quad Support System

Since you missed out on the promo when you were ordering, I would love a chance to help get you a discount. If you email [email protected] and explain the situation and give them your PEGYM forum username I will send them a message requesting that they provide you a special discount on the InfiniteFit Quad Support System.

Having our users get the absolute best results is important to us, and we are always happy to go that extra mile to ensure that.

Thanks for sharing.

[X4Labs Official X4Labs Reprensentive Find all posts View Profile Close X4Labs]

So my shipping took forever and ive had the product maybe a couple weeks now and its always felt tighter than my old extender so i used a kitchen scale to check the spring weight. turns out i have the 2800gram model instead of the 2100 it was advertised as. This means when attempting to extend at 700g ive been using 1300g , when trying for 1400g i was usin a little over 2000 grams. Im pretty upset about this because its been messing with my hours making me think something was wrong with me.

So x4 has told me they're goin to give me a partial refund for my issues. Once i confirm that has been done I will remove this post because at that point I will be happy with the service. But i do have to say im a little suspicious about if I will really get the refund because they didnt ask for any of my info, When I asked if they needed my info they said they were already looking at it. At this point Im guessing they BSed me to get me off the phone but hey if im wrong then great.

Hi ironaddict,

Sorry to hear that you were experiencing too much tension with your device. Although I am sure that the customer service representative you spoke with will indeed honor the arrangement you made, I would recommend that you did follow up though.

I see in our previous correspondence I do have your tracking number but is there any way you can send me a private message with your order ID number please.

This would give me something I can forward along as a reminder.

Thanks.

[X4Labs Official X4Labs Reprensentive Find all posts View Profile Close X4Labs]

Greetings PEGYM Enlargement Enthusiasts,

We have an exciting announcement for the PEGYM community! We have launched a really great new product!

The X4 Labs™ Extreme Red Edition Extender. This package includes a very special red version of our penis extender as well as a limited edition red InfiniteFit Quad Support System.

As an added bonus and to make this our most extreme enlargement package that we have ever offered, we added a one month supply of Sinrex Dual Synergy Male Enhancement Supplements. These pills are all natural and contain some of the most potent organic ingredients available on the market today.



Here is a quick rundown of what you get:

• Limited Edition Red and Gold Extender
• InfiniteFit Quad Support System
• Hybrid Support Piece
• Specially Calibrated 3600 Gram Tension Springs
• 8 Adjustable Comfort Straps
• 8 Silicone Harnesses
• 2 Ultra-Fit Velcro Straps
• Full Set of Gold Elongation Bars
• One Month Sinrex Dual Synergy Pills
• Deluxe Carrying Case
• X4 Labs $50 OFF Gift Voucher
• 10 Cleansing Wipes
• Lifetime Device Warranty
• Extender Cleansing Spray
• Penile Traction Lubricant
• PenisAccess DVD and Membership
• X4 Labs Extender Instruction Manual
• X4 Labs Instructional DVD

Once this package is gone, it is gone for good! So head on over to our website and order yours today!

Buy an X4 Labs™ Extreme Red Edition Extender!

Stay safe and happy enlarging, everyone.

[ez.hackster Junior Member Find all posts View Profile Close ez.hackster]

Hi ez.hackster,

You are not alone. Due to the shape of some penises, users can experience varying degrees of slippage with a penile traction therapy device. That is what makes our InfiniteFit Quad Support System so groundbreaking. It provides more stability but all the same comfort and more.

X4 Labs InfiniteFit Quad Support System

Since you missed out on the promo when you were ordering, I would love a chance to help get you a discount. If you email [email protected] and explain the situation and give them your PEGYM forum username I will send them a message requesting that they provide you a special discount on the InfiniteFit Quad Support System.

Having our users get the absolute best results is important to us, and we are always happy to go that extra mile to ensure that.

Thanks for sharing.

I adjusted the extender so it fits better now. My main issue is the loss of circulation in the head of my member. It gets pale, feels really sensitive when I move and my boxers/pants touches it. How would I go about getting circulation in the head so I can wear the extender for more than a hour? Thanks.

[ykm123 Senior Member Find all posts View Profile Close ykm123]

I adjusted the extender so it fits better now. My main issue is the loss of circulation in the head of my member. It gets pale, feels really sensitive when I move and my boxers/pants touches it. How would I go about getting circulation in the head so I can wear the extender for more than a hour? Thanks.

Being able to keep it on for an hour is good. What do you use to wrap your penis with before applying the X4 Labs Penis extender. Do you have the quad support head piece. I have used the quad support head piece and that allows for longer wearing. Below are my videos showing how I wrap to wear it. I have been able to keep it on for up to 90 minutes before having to take it off to adjust.

[ez.hackster Junior Member Find all posts View Profile Close ez.hackster]

Being able to keep it on for an hour is good. What do you use to wrap your penis with before applying the X4 Labs Penis extender. Do you have the quad support head piece. I have used the quad support head piece and that allows for longer wearing. Below are my videos showing how I wrap to wear it. I have been able to keep it on for up to 90 minutes before having to take it off to adjust.

I don't have the quad extender wish I did. I wrap the sponge around it then use the rubber to fasten it in place after a while blood flow stops in the head making it uncomfortable and sensitive.

[ykm123 Senior Member Find all posts View Profile Close ykm123]

I don't have the quad extender wish I did. I wrap the sponge around it then use the rubber to fasten it in place after a while blood flow stops in the head making it uncomfortable and sensitive.

How I wrap works for the traditional head supports as well. Using a thicker wrap works help allow you to wear it longr and more comfortably

[MTI Junior Member Find all posts View Profile Close MTI]

Hi there! Couple days ago my gold luxury extender with the quad support came in the mail. Unfortunately I'm not too happy about the piece of eqiupment for the prize that I had paid, I still want to say that the company has great customer service though! What is the procedure for me to get my full return? Thanks

[Dangler Senior Administrator☼ Wizard ☼ White Tiger Award 2015 Find all posts View Profile Close Dangler]

He is away until after the weekend. You might look on the x4labs website for
return instructions, maybe call their 1-866-851-8858 line.

see here :
https://www.x4labs.com/guarantee.php

[Hopeforgains Junior Member Find all posts View Profile Close Hopeforgains]

Should the extender be set using your BPFL or your BPEL

[ez.hackster Junior Member Find all posts View Profile Close ez.hackster]

How I wrap works for the traditional head supports as well. Using a thicker wrap works help allow you to wear it longr and more comfortably

Need some instructions on how to secure the extended so it doesn't slip off without loss of blood flow

[X4Labs Official X4Labs Reprensentive Find all posts View Profile Close X4Labs]

Should the extender be set using your BPFL or your BPEL

Hi Hopeforgains,

Since the extender is meant to be worn in a flaccid state, it should be set at your BPFL. The key is to feel a slight tug along your shaft, over time that will result in gains. Hope this helps.

Thanks.

[X4Labs Official X4Labs Reprensentive Find all posts View Profile Close X4Labs]

Need some instructions on how to secure the extended so it doesn't slip off without loss of blood flow

Hi ez.hackster,

This is a very common issue. I would recommend if you feel like you're experiencing loss in blood flow because your device is fastened too tightly that you either take periodic breaks or that you loosen the fastener slightly.

What you want to do is balance comfort and slippage reduction. I assure you, taking a 10-15 minute break every hour or so will not affect the end results. Also, not sure if you are a Quad user, but the InfiniteFit System was made in part to address this issue with penile traction therapy. Because of the larger surface area and increased number of slots, it allows users to limit slippage more effectively but without cutting off circulation or sacrificing comfort.

If you can give us more details about your current setup, I would be able to give you more accurate advice on how to adjust your device.

Let me know, thanks.

[MTI Junior Member Find all posts View Profile Close MTI]

I made this post 1 page back but I think you missed it!

Hi there! Couple days ago my gold luxury extender with the quad support came in the mail. Unfortunately I'm not too happy about the piece of eqiupment for the prize that I had paid, I still want to say that the company has great customer service though! What is the procedure for me to get my full return? Thanks