REP Support for Bathpump.com - Q & A

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

Ok, thanks. I'm looking forward to it.

Stefaka,

The image of the website page you sent doesn't appear to be bathpump.com. Unfortunately in that case I won't be able to help, as I can't speak for other businesses. It seems their math is completely off. I can tell you that for us at bathpump.com, some states and international shipments do require a tax (which varies depending on location).

If you want to know specific tax costs to a certain location for bathpump.com, just let me know.

Cheers,
Harrison

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

So you wont think it'll be a problem? Will it be a problem with a too short pump? Isn't Hercules and x30 the same size? In the FAQ, it says this: "The Bathmate Hercules works for gaining size up to 8.25 inches in length and 6 inches in girth. Once you get to that size or thereabouts and still want to gain more, we suggest moving up to the larger model, Bathmate Goliath. The Goliath will be re-stocked very soon."
This would work for me, but which one is correct?

Thansk for the help! An hey, where's my rep? I think maybe x40 will be good anyway! In case one's growing bigger than he believes

Panbird,

At bathpump.com we actually suggest the top end of the Hercules pump is 7.8 inches for length, the same as the X30. (apologies - I mistyped the dimension last time). The X40 goes up to 9 inches. You can see the full size dimensions here - http://www.bathpump.com/products/bathmate-hydropump-hercules

I still say you're best suited for the X40 for your goals - hope that helps! Thanks for getting in touch.

Cheers,
Harrison

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

PEGym citizens, this holiday weekend we're having a full-blown American sale - get great discounts on all our Bathmate pumps at bathpump.com! Use the codes below to access the discounts. Sale runs Thursday 7/3 through Monday 7/7!

$10 off Hercules with Weekend10
$15 off X30 with Weekend15
$20 off X40/Goliath with Weekend20
$30 off X30 Xtreme with Weekend30
$35 off X40 Xtreme with Weekend35

Let me know if you have any questions! If you're thinking of getting a Bathmate, now's a great time.

Cheers,
Harrison

[Bnip Retired Moderator Member of the Month July 2013PEGym Hero Find all posts View Profile Close Bnip]

I have had some time with my bathmate and I really enjoy using this pump when I have the chance to take a warm bath. I personally prefer air pumps but I do use my bathmate to get a good warm up that leaves me with a solid plump hang afterwards.

[malibu Member Find all posts View Profile Close malibu]

Is lovehoney.com a legit site for getting a bathmate? I am comparing the two pictures and the lovehoney pic looks different. The blue bar on the right side is different and some other minor differences. Also, does is version 3.0 the old one? Or the most up to date one? I just noticed even the boxes are different.

Why the difference in the pics?

Bathmate by UMProducts | BathPump

Bathmate Hercules 3.0 Hydrotherapy Penis Pump at Lovehoney - Free Shipping & Returns on Penis Pumps & Enlargers

[sammydubs Member Find all posts View Profile Close sammydubs]

How do u avoid getting the upmost part of the scrotum sucked in? Im currently putting a hair tie around my nuts which is helping a bit..

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

Is lovehoney.com a legit site for getting a bathmate? I am comparing the two pictures and the lovehoney pic looks different. The blue bar on the right side is different and some other minor differences. Also, does is version 3.0 the old one? Or the most up to date one? I just noticed even the boxes are different.

Why the difference in the pics?

Bathmate by UMProducts | BathPump

Bathmate Hercules 3.0 Hydrotherapy Penis Pump at Lovehoney - Free Shipping & Returns on Penis Pumps & Enlargers

malibu,

Unfortunately I don't have a full list of all legitimate sellers. I can tell you that if you find prices lower than what we offer on bathpump.com, then the site is not official, as we sell at the lowest allowable prices. Unofficial sites often just copy pictures from other sites so that they appear to sell legitimate products. If the pump looks different, and the boxes are different, it's a reasonable sign that you're not dealing with an official Bathmate.

Hope that helps,
Harrison

[Harrison BP Rep Official BathPump Representative Find all posts View Profile Close Harrison BP Rep]

Whats up…Ive had the Bathmate for months and cant get the suction to work consistently. I shaved and that doest help the suction. Ive taken the comfort pad off and the suction still isnt there (it worked once). I cleaned it still no suction. I use baby oil gel and still no suction. Please help me. Just thinking about the whole process makes me not want to do it. PLEASE HELP.

progress101,

Here's what the Bathmate manufacturers suggest:

# **Please can you try the relevant test below:**

**Bathmate Hydropump:**
Tutorials can be found at dxpsupport.com

**Hydromax Hydropump:**
If your pump has been left in the lock position over a period of time, it can change the formation of the valve.
Please flick the Hydromax pip (switch on top of the pump) left and right quickly, a few times.
This should then reset the valve.
Tutorials can be found at dxpsupport.com

If it doesn’t hold and you can see a fair amount of air we can try a flush test.
In the water again, submerge the pump, press down the cap, keep it pressed in,
place your hand over the end of the bellows gaiter and pump vigorously under water.
This will force water around the o ring and will remove any contaminants.
If there is any muck or debris there this will flush it out.

**Still, having an issue?...Please submit the following to [email protected]**

Whilst testing, can you see if the bubble's are coming from the valve tip or from inside the pump vessel?

If you're still having a problem, please private message me a picture of the back of the instruction manual, along with your full name, address and place of purchase. I can send your warranty claim to the manufacturer and ask them to ship out a replacement valve.


Harrison

[fickle Member Find all posts View Profile Close fickle]

I just tried the BM yesterday and read through this whole thread. It seems that while the penis is being pumped, its supposed to be remain and maintain in an erect/engorged state from the vac pressure? However, that wasn't my experience. I tried in 2 states: flaccid and erect. When I inserted erect, the penis gradually lost erection and became flaccid. When entering flaccid, it remained flaccid. What am I missing?

[Roguish75 Senior Member Find all posts View Profile Close Roguish75]

You're missing how long you can hold and erection ! :-)

I end up losing my erection over time, no big deal. I try to go in hard and let nature take it's course. I do long, very low pressure sessions, so I might take it off and get erect again and start over.

[FlyingPotato Senior Member Find all posts View Profile Close FlyingPotato]

Hello!
I have a question on the bathmate that I got last month. The problem is about the latch. After I hold water in my bathmate, I try to put it on. I need to pump it to let the water come out so it will pump my penis. But my latch cannot close itself properly. After I pump, the latch is not closed so it is leaking air. I need to manually close the latch to make sure it is closed.

Also, I notice my latch is not moving smoothly. Supposedly, the latch will let the water pass through. But these days, the latch just gets stuck there. I try to adjust the latch, and it feels a little bit rusty for some reason.

My bathmate is Hercules.

[eworthi Senior Member Find all posts View Profile Close eworthi]

I've had a similar problem. I can't get it to pull a vacuum anymore, and I've only had it a few weeks. Mine is in a place where I only have access to a shower but I'll try this test I found at the support site tomorrow
Link: https://dxproducts.zendesk.com/hc/en...alve-problems-

progress101,

Here's what the Bathmate manufacturers suggest:

# **Please can you try the relevant test below:**

**Bathmate Hydropump:**
Tutorials can be found at dxpsupport.com

**Hydromax Hydropump:**
If your pump has been left in the lock position over a period of time, it can change the formation of the valve.
Please flick the Hydromax pip (switch on top of the pump) left and right quickly, a few times.
This should then reset the valve.
Tutorials can be found at dxpsupport.com

If it doesn’t hold and you can see a fair amount of air we can try a flush test.
In the water again, submerge the pump, press down the cap, keep it pressed in,
place your hand over the end of the bellows gaiter and pump vigorously under water.
This will force water around the o ring and will remove any contaminants.
If there is any muck or debris there this will flush it out.

**Still, having an issue?...Please submit the following to [email protected]**

Whilst testing, can you see if the bubble's are coming from the valve tip or from inside the pump vessel?

If you're still having a problem, please private message me a picture of the back of the instruction manual, along with your full name, address and place of purchase. I can send your warranty claim to the manufacturer and ask them to ship out a replacement valve.


Harrison

[JesseV Senior Member Find all posts View Profile Close JesseV]

Hey guys. I'm curious how much expansion you all are able to get with Bathmate. I have a Bathmate Hercules, and since I started using it entering the pump erect, I am able to pump up to about 170mm (6.7"). My BPEL is 7.25" and my NBPEL (including slight upward curve) is about 6.25." So I am able to pump basically in-between my BPEL and NBPEL.

I started a thread here...

https://www.pegym.com/forums/penis-d...rect-size.html

But haven't really gotten any responses.

Just kinda curious if you guys can pump up to or beyond your BPEL, or if you end up in-between like me.

Any information is greatly appreciate. Thanks.

[eworthi Senior Member Find all posts View Profile Close eworthi]

I managed to get a decent vacuum with the Bathmate again by manually pressing in the black valve tab (or "pip" as the Brits say ) this was pretty frustrating, especially since it is so new, but after I fill it while pressing the tab in I then put my penis inside and get the Bathmate seated and pressured with the bellows but before I release the bellows pressure I have to make sure the tab is still pressed in.
Is this normal?

I've had a similar problem. I can't get it to pull a vacuum anymore, and I've only had it a few weeks. Mine is in a place where I only have access to a shower but I'll try this test I found at the support site tomorrow
Link: https://dxproducts.zendesk.com/hc/en...alve-problems-

[progress101 Junior Member Find all posts View Profile Close progress101]

Did this work for you?

I've had a similar problem. I can't get it to pull a vacuum anymore, and I've only had it a few weeks. Mine is in a place where I only have access to a shower but I'll try this test I found at the support site tomorrow
Link: https://dxproducts.zendesk.com/hc/en...alve-problems-