Quick Extender Pro Optimization and FAQ

[j5walter Junior Member Find all posts View Profile Close j5walter]

No, it's not typically dangerous for short periods of time. When your glans starts to get cold and/or numb, that's a good time to remove the QEP, take a break and do some massages to restore blood flow.

Sounds good. Thanks for your help.

[QEP Member Find all posts View Profile Close QEP]

Hi All. I have a question for anyone with the QEP.

How tight do you make the noose? I get it pretty snug to the point that I get cold and numbness so I don’t think I’m doing it too light.

My concern is when you look at the pictures on the box or their website, I’m not getting that look at all where the whole head is past the plastic and the silicone straps are parallel to the holes.

When I release it, the noose is at an angle towards my shaft and not parallel with the holes. I would think that we don’t need to strangle the little guy. Just enough that it stays in and doesn’t slip. Is that correct?

[Cunny Linguist Senior Member Member of the Month May 2021 Find all posts View Profile Close Cunny Linguist]

The pics on the QEP website are staged, NOT what it looks like when it's really in use. Yes, the noose is going to stretch, so it's not going to be in line with the holes.

You can take a look here to see how I made it more comfortable to wear without cutting off the blood circulation: https://www.pegym.com/forums/progres...ml#post1662639

[QEP Member Find all posts View Profile Close QEP]

The pics on the QEP website are staged, NOT what it looks like when it's really in use. Yes, the noose is going to stretch, so it's not going to be in line with the holes.

You can take a look here to see how I made it more comfortable to wear without cutting off the blood circulation: https://www.pegym.com/forums/progres...ml#post1662639

I did see that already. In fact, I was searching for silicon tubes and came across a site called Total Man Shop. They have an extender kit that seems like it would work 10x the way it’s designed. Have you heard of it? I’m tempted to give it a try. It comes with the silicon tubes already. The adjustability seems far superior. A guy has a pic posted in the reviews and you can see it’s pulling straight out and evenly with the way it’s setup. Check it out and let me k ow what you think. The QEP seems like it’s a little rough on the little guy just from a design stand point.

[QEP Member Find all posts View Profile Close QEP]

The pics on the QEP website are staged, NOT what it looks like when it's really in use. Yes, the noose is going to stretch, so it's not going to be in line with the holes.

You can take a look here to see how I made it more comfortable to wear without cutting off the blood circulation: https://www.pegym.com/forums/progres...ml#post1662639

Also, just to clarify, are you only tightening snug enough so it doesn’t slip out? I was trying to get it really tight so the noose was in line with the holes. In other words, it’s not squeezing but just resting just enough to holding in place?

[Cunny Linguist Senior Member Member of the Month May 2021 Find all posts View Profile Close Cunny Linguist]

Also, just to clarify, are you only tightening snug enough so it doesn’t slip out? I was trying to get it really tight so the noose was in line with the holes. In other words, it’s not squeezing but just resting just enough to holding in place?

Correct, using the sleeve and O-ring, you only need it to be tight enough to keep it from slipping out. The O-ring creates a ridge that keeps the noose from slipping off.

[QEP Member Find all posts View Profile Close QEP]

Correct, using the sleeve and O-ring, you only need it to be tight enough to keep it from slipping out. The O-ring creates a ridge that keeps the noose from slipping off.

Ok. Thanks. It’ll be a work in progress. I’m only on my second week and still have no compression in the springs fully extended. Is that normal? Added my first .2 and still no compression. Did you follow the program until you got some compression or did you speed up the process?

Did you happen to check out the Total Man Shop? Tons of videos on there. Seems like a pretty kick ass product. I’m going to order some stuff from there. They have the silicon sleeves and medical tape to put over it. They have a vacuum chambers too that I’m thinking could be used with the QEP by attaching it to the top 2 holes instead of using the silicone straps

[Cunny Linguist Senior Member Member of the Month May 2021 Find all posts View Profile Close Cunny Linguist]

Ok. Thanks. It’ll be a work in progress. I’m only on my second week and still have no compression in the springs fully extended. Is that normal? Added my first .2 and still no compression. Did you follow the program until you got some compression or did you speed up the process?

I am a grower, so I had to add in rods because my flaccid stretch is pretty significant.

[Rodeaway123 Junior Member Find all posts View Profile Close Rodeaway123]

The single biggest tip/action that helped me was to strap in to the glan holder (blue part that holds with the 4 holes) BEFORE tension is applied. Can do this several ways, such as:

1. Strap in, insert rods unscrewed and unattached rods into glan holder then screw them into base (rest of extender), or
2. Strap in, compress springs and insert rods into glan holder.
3. invent your own way.

Wearing the extender is very comfortable, and enjoyable, and tip of penis is above the blue end of glan holder just as shown in manufacturer example pics. Penis does not slip and can feel the tension. I do use a sock or wrap like burrito suggests for comfort - mostly to avoid pinching of the skin by the straps.
Important = must have the based of the extender already on (penis inserted into base hole) when strap in and do 1, 2, or 3 above.

[QEP Member Find all posts View Profile Close QEP]

The single biggest tip/action that helped me was to strap in to the glan holder (blue part that holds with the 4 holes) BEFORE tension is applied. Can do this several ways, such as:

1. Strap in, insert rods unscrewed and unattached rods into glan holder then screw them into base (rest of extender), or
2. Strap in, compress springs and insert rods into glan holder.
3. invent your own way.

Wearing the extender is very comfortable, and enjoyable, and tip of penis is above the blue end of glan holder just as shown in manufacturer example pics. Penis does not slip and can feel the tension. I do use a sock or wrap like burrito suggests for comfort - mostly to avoid pinching of the skin by the straps.
Important = must have the based of the extender already on (penis inserted into base hole) when strap in and do 1, 2, or 3 above.

Are you saying that your noose is parallel with the holes when tightened. Or that the tip is past the end of the glan holder but the noose still angles back towards your body? I can’t get it to look like the manufacturers pics no matter how tight it is as in the noose is lined up with the holes like in the pics.

[Rodeaway123 Junior Member Find all posts View Profile Close Rodeaway123]

Everything lined up and parallel just like in the pic. Noose may angle back slightly over time - but mostly not. Strapping in before any tension was the key for me - trying to get secure with tension and holding back and working nooses and etc., etc. - don't have enough hands and always slipped (angled back and lost tension over time). Super simple to strap in securely and comfortably with no tension.

[QEP Member Find all posts View Profile Close QEP]

Everything lined up and parallel just like in the pic. Noose may angle back slightly over time - but mostly not. Strapping in before any tension was the key for me - trying to get secure with tension and holding back and working nooses and etc., etc. - don't have enough hands and always slipped (angled back and lost tension over time). Super simple to strap in securely and comfortably with no tension.

Hmmm. Just strapped in before adding tension and get the same thing. I can’t imagine the amount of pressure you’d need to have it even close to parallel with the holes. Mine angles back to about the 2 lower holes.

[Cunny Linguist Senior Member Member of the Month May 2021 Find all posts View Profile Close Cunny Linguist]

So here's the thing...all of our bodies are different and react to extending differently. In the end you have to find what works best for you and not expect that what's working for one guy is going work for you also. For me personally the noose stretches a bit because I don't have it so tight that it cuts off my circulation. When I am strapped in and I have fully stretched out to my full flaccid stretch length, the noose is probably 3/8" to 1/2" BELOW the holes in the glans support.

One thing that has helped me out tremendously is to remove the glans support from the tension rods and THEN get strapped into the glans support. I have modified the back of the glans support to make fitting the glans support on to the tension rods AFTER I am strapped onto it.

Glans support modification.jpg

[Rodeaway123 Junior Member Find all posts View Profile Close Rodeaway123]

Well that is a pretty smart modification and allows accomplishing of strapping in with no tension. I get nice and secure - and then screw rods together - which does same.

[QEP Member Find all posts View Profile Close QEP]

So here's the thing...all of our bodies are different and react to extending differently. In the end you have to find what works best for you and not expect that what's working for one guy is going work for you also. For me personally the noose stretches a bit because I don't have it so tight that it cuts off my circulation. When I am strapped in and I have fully stretched out to my full flaccid stretch length, the noose is probably 3/8" to 1/2" BELOW the holes in the glans support.

One thing that has helped me out tremendously is to remove the glans support from the tension rods and THEN get strapped into the glans support. I have modified the back of the glans support to make fitting the glans support on to the tension rods AFTER I am strapped onto it.

[ATTACH]105215[/ATTACH]

I totally agree that everyone will have a different effect with the device. My line of thinking of thinking was to see if it was common or if something was wrong. I also have 4000 g springs so that can be a difference than some using lesser springs as there is more tension hence pulling the noose down further from parallel. I’ve added quit a few bars and I’m still not getting tension but I’m super close.

I did all of your mods including drilling holes for pins to keep it compressed. I’m an aerospace machinist so they were easy peasy. I also used the loctite to give it the adjustment screws like you have. I got gage blocks .250,.500,.750, and 1 inch to measure the amount of adjustment.

Fully extended I’m probably .400-.500 BELOW the bottom 2 holes closest to my body. And that’s with no compression on the springs.

I’m using gauze and the comfort pad so the noose isn’t directly grabbing the underside of my head and that’s probably why I’m getting so much angle. I’m waiting for silicone tubes to be delivered to try your setup.