Quick Extender Pro Optimization and FAQ

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

I'm pretty sure the screws are just there so that you can lock the device at a certain angel if desired. The only critical factor when using this device is to keep the springs compressed while wearing the device. That's the only way you will have the specified amount of tension applied. If the springs aren't compressed and the burrito isn't pulled tight you are essentially wearing an expensive ADS. Don't adjust the screws for tension. If you are having to do that then just add another small rod. Also be sure to inspect the device routinely to make sure all internal screws and rods are seated properly in the device. Otherwise you may have something come apart and it won't be pretty. I nearly lost my device one day in a department store through my pants leg because one of the screw rods came loose and the noose slipped lol.

[pedanny Junior Member Find all posts View Profile Close pedanny]

I'm not sure how to search this particular thread, so in case it hasn't been asked.

Has anyone found their Quick Extender Pro slipping constantly?

I keep pulling it tight and it just loosens itself a lot. I'm wondering if either the unit or the noose have got something slippery on them (like lube for example) and if there's a way to get it off or make it tacky and work properly again.

Anyone experience this? Super annoying. It's not my first day, either, I have over 520+ hours of use with QEP. Just never slipped like this before.

Thanks
pedanny

[Jon329 Junior Member Find all posts View Profile Close Jon329]

Great idea, I didn’t think of something as what I now think to be obvious. Ha well I would use the back holes to fasten in behind the gland and push the excess tubes back up through the front holes to prevent it from coming loose. It’s worked for me so far but I wasn’t able to fasten in this way when I would jelq up my glad fully before tightening in, I’d be touching the end of the tubes.

Thanks for sharing I will definitely be adjusting my device so I can strap in this way and now stretch with my glad full.

I don’t use gauze or anything just use the device bare I found at first some discomfort only when tightening down and loosing out the friction can be irritable how ever the few seconds pass and it’s comfortable for me so I’ve found using nothing is faster to get in and out and the friction helps keep me from slipping best.

[Jon329 Junior Member Find all posts View Profile Close Jon329]

I’d use dawn dish soap it gets rid of grease well and it’s not to strong of cleaner i haven’t had any damage to mine yet.

[Jon329 Junior Member Find all posts View Profile Close Jon329]

Wow reading your thread I can see the first time I order the QEP I really put myself at risk maybe for all those like me who ordered the replacement device and extra rods and didn’t get the DVD we should put the info about setting the device as to which length.

The mistake I made was I added enough bars the device was half an inch past my bpel. I would put on the device erect and compress the springs fully so that the straps holes lined up below the gland and I would stretch like that.

I ordered one of the bigger packages this time and of course watched the DVD and was in shock how poorly I wore it. I did search on here and on their website and didn’t find any information at the time.

Your post is great I wish I seen it from day one now I did have gains. After seeing your thread and the DVD I still feel like sticking to my ways however I’m definitely going to do as the DVD says and work my way to the 8 hours.


the only thing is when I did use the device this way the springs never were really compressed so I’m still confused to how I’ll have tension if I sent the device 1.5 inches less the my length ( question is it your flacid length then you subtract the amount from)???

The screws I would also use as I loosened up to increase tension as time went on during a session. I’m seeing you don’t recommend that either but say they’re just to tighten and hold the angle in place.

Seems I need to watch the video again and re set up my device I have a full routine I plan to jump into and I want to see max results so I’m glad I seen this post because I wasn’t going to listen to the video as I had gains of up to an inch bpel and almost to flacid.

Maybe we can have a sticky thread for extenders that just explains the length to set your device up in comparison to your size and state if you should use it in only a flacid state. Those two seriously went over my head and I think it could happen for others to also leave in the increase in length after each time marker.


I know with the cost of this device there must be many others going the cheap way as I did and with the videos there’s loads of room for confusion. Even if your thread could be sticky I can’t seem to find threads only for traction devices. Maybe a direct root could help with great loggin and information as you have.

[pedanny Junior Member Find all posts View Profile Close pedanny]

Hi Jon,
I could maybe modify my spreadsheet so others could easily use it as well as put a guide/calculator for getting started? It keeps track of my total hours so I know when to upgrade as well.
If anyone's interested I can work on this.

Thanks
pedanny

[Capital J Junior Member Find all posts View Profile Close Capital J]

Thank you burrito for your anti slip technique!

I tried wearing it for months but it didn't feel as effective as it does now that I am using your technique. It wasn't slipping out but it was slipping enough to the point where it couldn't maintain the tension of the springs.

Now when I strap in all 3 lines don't show and over time they do which is basically my burrito giving into the force and stretching further.

Thanks again bro

[Acesfool Junior Member Find all posts View Profile Close Acesfool]

I'm not sure how to search this particular thread, so in case it hasn't been asked.

Has anyone found their Quick Extender Pro slipping constantly?

I keep pulling it tight and it just loosens itself a lot. I'm wondering if either the unit or the noose have got something slippery on them (like lube for example) and if there's a way to get it off or make it tacky and work properly again.

Anyone experience this? Super annoying. It's not my first day, either, I have over 520+ hours of use with QEP. Just never slipped like this before.

Thanks
pedanny

I can only keep it on by not using the foam pads and making sure I don't move once I have it on. So I try to make sure I have a couple of hours in the evening that I can wear it undisturbed and I'll put it on before I go to bed because I know I'll be getting up in a couple of hours to pee. I can't use any kind of padding, even the gauze makes it slip off.

[Alex1988 Senior Member Member of the Month Aug 2021PEGym Hero Find all posts View Profile Close Alex1988]

The quick extender pro doesn't have a very important feature. The latches on the backside where the noose usually attaches are missing.

There are 20$ extender out there that have that very important feature for using noose.

You could just get the upper part and stick it on the quick extender. They should be compatible.

[PizzaTheHut0709 Junior Member Find all posts View Profile Close PizzaTheHut0709]

Just wanted to give a shout out to Ultimate Burrito. You sir are a hero. This is the most helpful info on the QEP I've found on the entirety of the internet. The baby sock is the most genius comfort solution and my member thanks you. QEP should be paying you for your excellent customer support.

[RS25 Junior Member Find all posts View Profile Close RS25]

Hi guys,

First of all thank you guys for all the great tipps, especially with the children's sock is great (Thx Burrito)! I got a quick question and was wondering if anyone else has experienced this:

I've been using the Quick extender pro now for 3 month with lackluster results (I started out with a NBPEL at 6,2" and read that the bigger you are, the slower the progress). Usually I wear the QEP around 6-7 hours for 3 days and then having a rest day.
2 days ago it was time to add another rod, which I did, but it felt like the length is too much now (my glans is getting numb after 30 minutes, so I have to remove the QEP for a break). Normally I can wear the QEP for 2 hours without a problem, so 30 minutes is rather short. Then I decided to remove the last rod and go back to my previous length before the last additional rod and I still feel a good stretch, even though I already was at this length for the recommended 56 hours.
So my question is, what would you guys do? Wear the QEP until you feel no stretch and then keep adding? I feel like I hit a plateau and was curious if someone else, using the QEP, does know what to do.

Kind regards,
RS

[Davey Jones Junior Member Find all posts View Profile Close Davey Jones]

PE smarter, not harder brah

Progress Log|Extender Progress Log
Recommended Routine|Dating Advice
Homemade Power Jelqer - How to
2016 (5 1/2 x 4 1/2) > 2017 (7 5/8 x 5 5/8) > Jan 2020 (7 3/4 x 5 3/4) > Sept 2020 (8 x 5 3/4)
BPEL Gains: 2.5" | MEG Gains: 1 1/4"

Wow man!!! well done they are excellent gains! may I ask do you do hanging pumping etc?

[RS25 Junior Member Find all posts View Profile Close RS25]

Thank you for this valuable advice

[Donkeyhole12 Junior Member Find all posts View Profile Close Donkeyhole12]

Question. Before we put more extension rod,are we supposed to twist the rod to extend it to the lines mark on the rod? I've seen other videos that's how it's supposed to be use.

[Donkeyhole12 Junior Member Find all posts View Profile Close Donkeyhole12]

NVM, I got the answer from reading the post 😆🤣