Quick Extender Pro Optimization and FAQ

[Chr1so Member Find all posts View Profile Close Chr1so]

I've been using QEP with bathmate for 2 months and I haven't gotten any gains. Am I doing something wrong or need more time? I noticed that QEP gives me no tension as the spring in it is so strong that the QEP goes to full length when I have it on. My penis hangs in the noose down from the holes instead of being parallel with QEP holes. I noticed when I used my phallosan I could feel the stretch and the tension. Maybe QEP is just stretching my penis as far as it will go and not try to go above its limits.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

I've been using QEP with bathmate for 2 months and I haven't gotten any gains. Am I doing something wrong or need more time? I noticed that QEP gives me no tension as the spring in it is so strong that the QEP goes to full length when I have it on. My penis hangs in the noose down from the holes instead of being parallel with QEP holes. I noticed when I used my phallosan I could feel the stretch and the tension. Maybe QEP is just stretching my penis as far as it will go and not try to go above its limits.

I have some pics in my album of me wearing the device I don't know if a comparison would help. I definitely felt the tension when I was wearing the device. How long do you wear the device each day? How many days a week? How many rods have you added since wearing?

[foranon25 Junior Member Find all posts View Profile Close foranon25]

So I just got this thing but do not have a CD drive to watch their video. Just curious if they go over anything about the lines? I plan on going easy but just to test it I cannot get it to compress passed the bottom line and it completely resets no matter how many bars I put on. Suggestions?

[Chr1so Member Find all posts View Profile Close Chr1so]

I have some pics in my album of me wearing the device I don't know if a comparison would help. I definitely felt the tension when I was wearing the device. How long do you wear the device each day? How many days a week? How many rods have you added since wearing?

I've been wearing QEP and using bathmate 4-5 days every week. I wear QEP for 6-10 hours a day, mostly 8 hours each of those days. I've been waiting for my penis to become parallel to the QEP holes to add more rods. Right now I can only fit 2 small rods each side for the first 2 holes of the QEP. I believe this is equivalent to the last 2 holes on the QEP so I took off the rods and have the noose around the farthest 2 holes.

I will tell you interestingly if I get an erection the device stays on and doesn't slip off like it says it will. And I do notice my head gets cold. So I think I am strapped in tight enough.

I can't figure out how to tuck the excess noose around like you have shown too as it just flies off I tried everything besides extremes like taping/gluing it there.

I am starting off very small. From my pubic fat bottom of my penis to my tip flaccid I measure 2 inches long with 3.75 inches girth. Erect is 4 inches long and 4.5 inches girth.
122685097_811745986294719_5041602055542198543_n.jpg122725456_359164488639274_64179723932952064_n.jpg122684443_1019259221925510_1832944512108674137_n (1).jpg

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

I've been wearing QEP and using bathmate 4-5 days every week. I wear QEP for 6-10 hours a day, mostly 8 hours each of those days. I've been waiting for my penis to become parallel to the QEP holes to add more rods. Right now I can only fit 2 small rods each side for the first 2 holes of the QEP. I believe this is equivalent to the last 2 holes on the QEP so I took off the rods and have the noose around the farthest 2 holes.

I will tell you interestingly if I get an erection the device stays on and doesn't slip off like it says it will. And I do notice my head gets cold. So I think I am strapped in tight enough.

I can't figure out how to tuck the excess noose around like you have shown too as it just flies off I tried everything besides extremes like taping/gluing it there.

I am starting off very small. From my pubic fat bottom of my penis to my tip flaccid I measure 2 inches long with 3.75 inches girth. Erect is 4 inches long and 4.5 inches girth.
[ATTACH]104112[/ATTACH][ATTACH]104110[/ATTACH][ATTACH]104113[/ATTACH]

Do you compress the springs when you put the device on? The springs should be all the way pressed in with the burrito inserted and noosed down before you release the tension. If you have worn the device for that many hours and that much time and not added several rods, you are doing something wrong.

[foranon25 Junior Member Find all posts View Profile Close foranon25]

Could you please give a rundown what they go over in the video? Again, I don't have a disc drive to watch the dvd.

[Chr1so Member Find all posts View Profile Close Chr1so]

Do you compress the springs when you put the device on? The springs should be all the way pressed in with the burrito inserted and noosed down before you release the tension. If you have worn the device for that many hours and that much time and not added several rods, you are doing something wrong.

I haven't because when I did my burrito would end up at the same ending position (hanging down the noose) where there is no tension per say because the device springs to its full length. My burrito is stretched but I feel like its not getting stretched enough to grow. Also I find it difficult to compress the device without two hands. I feel like my device needs lube or something as I have to compress my device VERY HARD for it to compress all the way. If I use my left hand, the left side likes to compress leaving the right side not compressed and vice versa. The only way I can compress my device is to use two hands then release one and hope the device stays compressed so I can tighten the noose or I have to start it all over.

Anyways even though it doesn't seem to make any difference for me I'll start compressing and adding rods and get back to you in a month or so. You've gotten great results and that's why I bought the QEP and hope I can get same gains as you!

EDIT: Just curious, does your burrito ever slip out of the noose when you add rods too fast? Because mine just did after 30 minutes. I added 2 rods each bar instead of 1 and I could feel a better stretch than before even though the device went to full length again. I'm just going to take 1 rod off each bar and see how I do and go from there.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

I haven't because when I did my burrito would end up at the same ending position (hanging down the noose) where there is no tension per say because the device springs to its full length. My burrito is stretched but I feel like its not getting stretched enough to grow. Also I find it difficult to compress the device without two hands. I feel like my device needs lube or something as I have to compress my device VERY HARD for it to compress all the way. If I use my left hand, the left side likes to compress leaving the right side not compressed and vice versa. The only way I can compress my device is to use two hands then release one and hope the device stays compressed so I can tighten the noose or I have to start it all over.

Anyways even though it doesn't seem to make any difference for me I'll start compressing and adding rods and get back to you in a month or so. You've gotten great results and that's why I bought the QEP and hope I can get same gains as you!

EDIT: Just curious, does your burrito ever slip out of the noose when you add rods too fast? Because mine just did after 30 minutes. I added 2 rods each bar instead of 1 and I could feel a better stretch than before even though the device went to full length again. I'm just going to take 1 rod off each bar and see how I do and go from there.

I had a lot of issues with the noose slipping until I started folding the noose over and tucking the loose ends in as described in my anti-slip technique.

[pedanny Junior Member Find all posts View Profile Close pedanny]

Hi foranon25,
YOUR ADJUSTED STARTING MEASUREMENT:
Whatever your regular erect length is, you subtract 1.6 from it. So mine was 4.5 erect, so Adjusted Start size is 2.9. Well the device itself is 3.6 inches, so I just started with NO rods. Otherwise you start with measuring out how many 0.2 inch rods will make it to your Adjusted Start size.

STARTING OUT/ACCLIMATION PERIOD:
You start out doing up to 3 hrs a day until you hit 15 hrs, then you add 0.2 inch rod. Then you do up to 6hrs a day until you reach the next 30 hours. Add another 0.2 inch rod. Now you do 40 hrs at max of 8 hrs per day. Add 0.2 inch rod. Acclimation period over, do up to 8 hrs a day and add new 0.2 inch rods every completed 56 hrs.
I spreadsheet this to keep my sanity.
Screen Shot 11-10-20 at 09.48 AM.jpg
I can upload the video later if you still need it.

Thanks
Pedanny

[foranon25 Junior Member Find all posts View Profile Close foranon25]

Hey thanks pedanny! Do you ever use the screws to extend the length, or do you just add another piece?

[j5walter Junior Member Find all posts View Profile Close j5walter]

Hey thanks pedanny! Do you ever use the screws to extend the length, or do you just add another piece?

I'm pretty sure the screws are just there to secure the device and you aren't supposed to use them to change the length (otherwise your QEP could get too long and you risk damaging your penis). You only have to add the extension rods to make it longer, but make sure you follow the proper schedule and don't add too many rods too quickly.

Hi foranon25,
YOUR ADJUSTED STARTING MEASUREMENT:
Whatever your regular erect length is, you subtract 1.6 from it. So mine was 4.5 erect, so Adjusted Start size is 2.9. Well the device itself is 3.6 inches, so I just started with NO rods. Otherwise you start with measuring out how many 0.2 inch rods will make it to your Adjusted Start size.

STARTING OUT/ACCLIMATION PERIOD:
You start out doing up to 3 hrs a day until you hit 15 hrs, then you add 0.2 inch rod. Then you do up to 6hrs a day until you reach the next 30 hours. Add another 0.2 inch rod. Now you do 40 hrs at max of 8 hrs per day. Add 0.2 inch rod. Acclimation period over, do up to 8 hrs a day and add new 0.2 inch rods every completed 56 hrs.
I spreadsheet this to keep my sanity.
[ATTACH]104167[/ATTACH]
I can upload the video later if you still need it.

Thanks
Pedanny

Would you mind uploading the video? I think there are many of us who don't have a DVD player and so couldn't watch it, so you would really be helping us out.

Thanks.

[foranon25 Junior Member Find all posts View Profile Close foranon25]

Well why are they adjustable/allow you to make your device longer if you're not supposed to use them as such?

[j5walter Junior Member Find all posts View Profile Close j5walter]

Well why are they adjustable/allow you to make your device longer if you're not supposed to use them as such?

I haven't seen the video so I'm not certain, but I think those long screws are just there so that even if you add a bunch of extension rods all of them will still be secure. I think it'll stop being as adjustable after you add more extension rods.

[Mistaree Junior Member Find all posts View Profile Close Mistaree]

Hi first time poster here...just wondering what you mean by adjusting screws to compress the springs?

How would one adjust the screws?

Cheers

[pedanny Junior Member Find all posts View Profile Close pedanny]

I'm pretty sure the screws are just there to secure the device and you aren't supposed to use them to change the length (otherwise your QEP could get too long and you risk damaging your penis). You only have to add the extension rods to make it longer, but make sure you follow the proper schedule and don't add too many rods too quickly.



Would you mind uploading the video? I think there are many of us who don't have a DVD player and so couldn't watch it, so you would really be helping us out.

Thanks.

Sure, I uploaded here. Only those of us with the link can view. Hope it helps.

Quick Extender Pro Getting Started DVD:
https://vimeo.com/497045303/5cfa311646
https://vimeo.com/497045303/5cfa311646


Thanks
pedanny