Quick Extender Pro Optimization and FAQ

[Reapso Senior Member Find all posts View Profile Close Reapso]

I think I am going to exhaust my gains with manual stretching and jelqing before I use the extender long term. I also think it will be easier once I loose some weight as well.

[mh0458 Junior Member Find all posts View Profile Close mh0458]

That is not the Quick Extender Pro but congrats on your gains!

There are quite a few similar products online. Recently found an extender very similar to the size genetics which is priced at over $250 for $99 on amazon (so you can literally get it within 24 hours).

http://www.amazon.com/gp/offer-listing/B01F1WIP9E

[Dickjourney91 Senior Member Find all posts View Profile Close Dickjourney91]

Ok so now i have everything in line. And i have just one questions.

When i put my dick inside the device i need to compress the springs so that all 3 mark or cover ed by the rods? Now while i hold The device compress ed i put my dick inside and strap it and then i let go.

Now when i let go the springs they will no longer be conpressed but instead deconpressed. So how do u know how much tention is applied? I mean the springs have 3 marks. Do all 3 marks of the springs need to be decompressed or not covered to get the 3500 tention?

So how do you measure the tention. The device has 3500g. But how do u know 3500g tention is applied?

[newtoPE123 Junior Member Find all posts View Profile Close newtoPE123]

Thank you for that explanation on the compressed/decompressed springs Burrito! I thought I was doing something wrong. The DVD and user manual are a little confusing if not contradicting at times. Going into my first week, I'm realizing that the User Size is measured against erect rather than flaccid. I wasn't feeling any tension at all the first few days because I was using the measurement of my flaccid state. Will keep posted of gains once I get there!

[Rune Junior Member Find all posts View Profile Close Rune]

I have got my Quick Extender Pro, but there seems to be something wrong.

I have trouble with the springs, or the spring loaded mechanism. The issue is exactly the same as this reviewer in this Youtube video experiences:
https://www.youtube.com/watch?v=m6BvMBjW4z8

If you fast forward to 2.10, you will see exactly what I mean. One side is stucked and the other side seems to slide as it should.
I have not used the extender yet, because I just recently got it and when I tested it, it did not seem to work as it should.

Does anyone know how to fix this problem, so that I can start using it?

[Rune Junior Member Find all posts View Profile Close Rune]

Well, I think I figured it out. Pressing down the tension springs doesn't run completely smoothly at all now, but fairly good enough. I used some lubrication oil for my hair clipper, and added a drop here and there, everywhere there metal parts would move up and down. And it did work. Now I actually can compress the tension, not very smooth, but good enough. The problem is the tension markings on each side, that is three grooves cut in the metal. It gets caught on those when pressing down. The grooves would probably wear down by itself by time.

I tried the extension on. I had to add some bars. I did not measure or anything beforehand, as you should, just put it on and got it to fit. I did for sure feel the stretch. But after a short while, I was not sure anymore. I checked, and there were no tension. I have to add another bar. But I gave up for today, it was just a short fitting.

I found it difficult to put on, but after a little fiddeling and some on and offs, I found it quite easy and straightforward. I found it quite easy to use under stretch jeans. It does not really show at all if I wear it upright and pointing to one side. Well, I will try to wear it properly tomorrow, and for more than the 15 minutes I wore it today.

I can not use the extender for 8 hours a day or so anyway. 2-4 hours every evening is what I can do. I guess that is probably fine, if I just counterbalance that with adding more days of wear.

Initially I was not too happy since I had this problem with the device, but now that I got it to work, it seems like a fairly good extender. The parts look high quality, it seems like a sturdy device all over, and so does the extras, and the storage case is very nice. I'm quite impressed with the nice storage case. That is for sure a bonus. I did buy the Peyronie's Edition, because it was the most valuable for what I wanted. It was quite confusing to choose one, actually.

I have a strong recommendation, if anybody are thinking of buying a Quick Extender Pro, and that is to buy it from the Canadian website, and pay in Canadian dollars. Why? Because it is cheaper. I bought from the UK website, and had to pay more. The Canadian site is the cheapest, and they send the parcel from Canada anyway (if you live in Europe, I don't know what they do in America). So that is just a short tip.

If I don't remember wrong, it was so that the US and Canadian website had exactly the same prices. But the difference is in the currency, Canadian dollars are worth less than US dollars, and that's how you can save some money.

[Gonzerasu20 Junior Member Find all posts View Profile Close Gonzerasu20]

How long did it take you to see results using the quick extender pro and can you wear it 12hrs a day?

[Erock28 Member Find all posts View Profile Close Erock28]

How long did it take you to see results using the quick extender pro and can you wear it 12hrs a day?

I saw some results in 2-3 months wearing it around 4-5 per day. I guess you technically could wear it for 12 hours a day but in my experience it would be very uncomfortable to do so...obviously each person will have a different pain threshold.

[Scrap N Packs Junior Member Find all posts View Profile Close Scrap N Packs]

I’ve started using the QEPro, and I’ve been going about a month now. I’m feeling some pulling, but more in the inner burrito vs the actual. Is this correct?

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

I’ve started using the QEPro, and I’ve been going about a month now. I’m feeling some pulling, but more in the inner burrito vs the actual. Is this correct?

Sounds about right. As long as you've been following the instructions outlined here you should be good.

[NathanDrake Member Find all posts View Profile Close NathanDrake]

Does anyone have tips for tightening the second noose? The first one right behind my head is easy, but the second one is very painful and pinches when I attempt to tighten it. I often only use the one noose, but I am trying to decrease chances of slipping out.

Thank you.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

Does anyone have tips for tightening the second noose? The first one right behind my head is easy, but the second one is very painful and pinches when I attempt to tighten it. I often only use the one noose, but I am trying to decrease chances of slipping out.

Thank you.

I just used the anti-slip technique and ditched the second noose. If you wanted to help reduce slippage you could use non-adhesive sports wrap and wrap it around the under side a few times to create resistance from slippage or you could take the silicone tubing to a hardware store and find the proper size o-ring and put several on each end pushed up against the bottom of the extender pad. That would also help create resistance from slipping. It's just extra work and the second noose never made that much of a difference to me.

[NathanDrake Member Find all posts View Profile Close NathanDrake]

Thanks for the advice.

[Richardwad Senior Member Find all posts View Profile Close Richardwad]

I couldn't get the second noose to work either. It just pinched more than anything.
Make sure you get warmed up and do some manual stretching before the extender.
Jelqing or a light pump session will engourge the glans some for a better grip with the noose.
I use the comfort pad.
I got a 5/16" flat washer. You will need to pinch the two ends of the noose tubing to get the washer on, but work it onto the tubing.
Once you have the penis sencht down, slide the washer up to the cradle and this should keep the noose from loosening up.
There is a point where there is more tension than the strap can hold.
You may have to back down some if you you keep slipping out.
Less tension for longer time produce results.

Be safe and enjoy!

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

I tried a lot of different methods to keep the noose from slipping and the only one that really worked and allowed for me to quickly take if off if needed was the method where you take the ends of the noose and fold them over the top and then tuck them into the sides of your burrito. Wedging the ends between the top noose provided enough grip to prevent it from ever slipping. It also didn't consume extra time fumbling around with attaching or detaching extra components.