Quick Extender Pro Optimization and FAQ

[6inDongNotForLong Senior Member Find all posts View Profile Close 6inDongNotForLong]

I had to buy the VLC add on from TLC for my QEP.
It's a different type of pull, I have to take it off every hour regardless of which set up I use.

[Slitherinsnake Senior Member Find all posts View Profile Close Slitherinsnake]

I'm literally struggling to learn this thing. I can't get it to stay completely compressed or even near it. I'll add and I'll take away and it will be the same result

[Erock28 Member Find all posts View Profile Close Erock28]

I'm literally struggling to learn this thing. I can't get it to stay completely compressed or even near it. I'll add and I'll take away and it will be the same result

I’m trying to picture what your issue is. So you push (compress) the springs in towards your body, strap in, and then the springs don’t stay compressed? They stretch back out to the normal length?

If so, that’s what you want to happen. The only time to extender is compressed on me is when I’m first strapping in. Once that’s done and I’ve tightened the noose, I let it go and the springs extend and push forward..:that’s where you get the tension from.

Please explain if I’m not understanding you correctly.

[Slitherinsnake Senior Member Find all posts View Profile Close Slitherinsnake]

I’m trying to picture what your issue is. So you push (compress) the springs in towards your body, strap in, and then the springs don’t stay compressed? They stretch back out to the normal length?

If so, that’s what you want to happen. The only time to extender is compressed on me is when I’m first strapping in. Once that’s done and I’ve tightened the noose, I let it go and the springs extend and push forward..:that’s where you get the tension from.

Please explain if I’m not understanding you correctly.

How much tension are you getting? I’m getting tension but it’s light I think. Not a real tug. Is the device base sticking to your body or is it a bit free against your fat pad?

[Erock28 Member Find all posts View Profile Close Erock28]

How much tension are you getting? I’m getting tension but it’s light I think. Not a real tug. Is the device base sticking to your body or is it a bit free against your fat pad?

It sits against the pad but doesn’t push in. Sometimes it comes a bit loose but not enough to prevent gains...if that’s what your concern is.

Does your dick look stretched out and thinner than normal? Is your head strapped in?

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

When you think you are ready to add another rod start off by adding the rod halfway or towards the end of your extending time for the first week. This helps ease your way through the transition and will help to prevent slippage or extra discomfort.

The reasoning I this, you are already warmed up and stretched versus starting with a new rod cold turkey.

[Rune Junior Member Find all posts View Profile Close Rune]

I bought the Quick Extender Pro yesterday, and will hopefully get it relatively soon. Thank you for all the tips and tricks.

It is quite an expensive extender, especially for me who lives in Norway. We have to pay the price + shipping and 25% Norwegian VAT on both the price and the shipping + around 20-25 dollars in customs fees. But, the only extenders we have in this country is the Jes Extender of all sort, several types of Male Edge, Androextender/Andropenis and ProExtender. The last one is very cheap, since I found it on sale at a 50% reduction. So that was the one I had decided to buy before I started doing any research. After research I ended up with the over three times as expensive Quick Extender Pro. But I'm sure it will be worth it.

In one sex shop in this country I found an extender called Size Matters. I have no idea what that is, and if it is any good? The big problem with penis extenders are that the manufacturers or resellers don't say how much tension it has. For example Jes Extender, does it have maximum 1500 or 4000 grams in tension? What is the tension of ProExtender? Or Size Matters?

About tension I read all sorts of conflicting information. I landed on believing that a greater tension is important, maybe not in the beginning, but in the long run. And Quick Extender Pro, the Peyronie's edition I bought have 4000 grams tension. I don't really have Peyronie's I think, perhaps a little bit, I don't know and it doesn't bother me, but I bought the Peyronie's edition because it was the cheapest of the ones with 4000 grams tension. Another thing is that I don't thing I will be able to wear extenders for 6-8 hours a day. I need to be alone in the house, I think, so 2-4 hours is what I see realistic. But I don't know for sure yet before I have tried it on and examined how visible it is and how comfortable it is or not.

I think it is possible to wear an extender for shorter time but with higher tension and still gain. Why? Because I saw this video from the Mayo Clinic:

https://www.youtube.com/watch?v=Gre5WJYG6wc

I came across this video when researching penis extenders, and found it really interesting. For those who have Peyronie's, the extender he developed looks really great! And does seem to have advantages compared to other extenders. But it does cost a real fortune ($499). If you want to see what it looks like, you can find it here: restorex.com

The very interesting thing is that this doctor's invention of a penis extender is to be used only for 30 minutes, twice a day. That is very interesting. I had decided to buy this device, but quickly changed my mind when I saw the price. Another thing is that it does not currently ship outside US and Canada.

Anyway, now I have ordered the Quick Extender Pro, and don't regret that at all, and don't think I will either.

Next up is to measure my cock correctly to have a start measurement. I just have to find out what the correct way of measuring is. I really have no idea about my size. I have measured before, but can't remember what it was. I do remember it is around average or slighly above. I do think it has shrinked lately due to bigger fat pad and optical illusions (the smaller you are the bigger your cock will look, and opposite if you gain weight). I used to be happy with my size, but now I'm not too happy anymore, no. Luckily it is possible to do something about it. I just beg I'm not one of those who doesn't gain. Or maybe they actually do gain but are doing something wrong and don't gain anything because of that, and then think they can't gain whatever they do. Yes, I hope that is the case.

[BeavisMacon Senior Member Find all posts View Profile Close BeavisMacon]

The springs should be compressed when the device is on. It is normal for the springs to be fully extended after wearing the device for a bit. Just use trial and error. Add or remove rods and wear for am hour and see how it goes until you can put the device on and the springs are compressed and it doesn't slip off.

what does this mean? When I put it on I compress the springs and then strap in. When I let go don't the springs extend? How would I know if they're more or less extended?

[BeavisMacon Senior Member Find all posts View Profile Close BeavisMacon]

If you are new to extending, follow the guidelines from the company. There is a conditioning period that you go through first and this helps you get comfortable with using the device. Following their program, you will be adding rods quickly initially. You also do not wear the extender at your full erect length. The device secures behind the glans so subtracting from your length accounts for that.

I thought the company said to wait until 52 hours to add rods? That seems like so long for me. I'm only able to get 1.5 - 3 hrs a day, so that would take me two months to add anything. Also, I've always heard you extend PAST your erect length. Why do you say not to wear it at your erect length?

[BeavisMacon Senior Member Find all posts View Profile Close BeavisMacon]

So the tension comes from the springs? Does twisting the knobs at the base increase tension or what? I wish there was more clear mechanical diagrams of these things so I could really understand what's going on here.

Rods increase length, noose holds it at that length, and the springs provide tension? So the tension basically turns it from an ADS to a penis size device? Sorry for all the questions tonight.

[Erock28 Member Find all posts View Profile Close Erock28]

[QUOTE=BeavisMacon;1611241]So the tension comes from the springs? Does twisting the knobs at the base increase tension or what? I wish there was more clear mechanical diagrams of these things so I could really understand what's going on here.

Twisting the knobs does not increase tension, it simply allows the extender to pivot around

Everything else you mentioned is correct to the best of my knowledge

[Erock28 Member Find all posts View Profile Close Erock28]

what does this mean? When I put it on I compress the springs and then strap in. When I let go don't the springs extend? How would I know if they're more or less extended?

You’ve got it. You compress the springs into yourself, strap in, and let go. The springs extend which gives you the stretch. IMO if you’re penis looks stretched in the extender and you’re not in pain, you’re on the right path.

You could always measure yourself while in the extender, if it’s longer than your normal flaccid size then again you’re on the right path

[Cavalier Retired Super Moderator Member of the Month Feb 2015PEGym Hero Find all posts View Profile Close Cavalier]

There should be some indicator lines on the rod compressing the spring. When you compress the extender down all the way these lines will be covered up by the spring cylinder rod. Once you are strapped in you go by how many of these lines remain covered up for the desired tension you want by adjusting the knobs(adjustment screws). The more they are screwed out the more it will compress the springs. The more lines that are covered up the higher the tension.

[Erock28 Member Find all posts View Profile Close Erock28]

There should be some indicator lines on the rod compressing the spring. When you compress the extender down all the way these lines will be covered up by the spring cylinder rod. Once you are strapped in you go by how many of these lines remain covered up for the desired tension you want by adjusting the knobs(adjustment screws). The more they are screwed out the more it will compress the springs. The more lines that are covered up the higher the tension.

I’ve never been able to get the lines to stay covered. I’ve currently got the extender set for roughly 2-2.5 inches past my flaccid size, so I’m definitely getting a good stretch.

I can’t understand how far I’d have to set the extender for it to not fully release and reveal all the lines. I feel like there’s now way that I could even get close to even strapping I’m at that length.

What am I missing here?

[Cavalier Retired Super Moderator Member of the Month Feb 2015PEGym Hero Find all posts View Profile Close Cavalier]

Your normal flaccid length has nothing to do with it. While in the extender your penis should be in it's fully stretched flaccid length so it needs to be fully stretched out with the springs compressed while attaching it. If it isn't it would be impossible for it to have any tension on it. Just keep adding rods until you have reached the point where the springs remain partially compressed when you release it. From there you can make the adjustments to increase or decrease the tension.