Quick Extender Pro Optimization and FAQ

[Tooltime Junior Member Find all posts View Profile Close Tooltime]

Hello, and my very first reply. I bought this from Amazon, Using it for about 6 months. I never did any measurements,, But I do know I have had good gain in length. It has taken me about 4 months before it was comfortable, that I could wear all day. I think that's when the bigger gains start.
I bought mine from amazon, it was cheap compared to anything else i found. I don't know if the tension springs work , like they should. So far, I am happy. I can show a picture,, of the one i bought,, and with it in use.. I don't know how to put pictures yet.. Happy New year to all, From Ontario , Canada.

[Tooltime Junior Member Find all posts View Profile Close Tooltime]

This what I have. <link removed>
ext.jpg

[Tooltime Junior Member Find all posts View Profile Close Tooltime]

I have found that a 3/4" inch by about 10" strip of tension bandage for a wrap. Tension bandages will expand and contract.. and also give a firm hold on the penis,, without slipping off.

[Tooltime Junior Member Find all posts View Profile Close Tooltime]

I don't mind taking a picture to show how i do it, if requested.

[Cavalier Retired Super Moderator Member of the Month Feb 2015PEGym Hero Find all posts View Profile Close Cavalier]

Welcome to the forum.

Links to commercial websites are not allowed on the forum so I had to delete it. I inserted a picture of the device.

It's a pretty common generic extender that can be purchased from many places. The biggest difference is that it uses a noose to grip the glans vs a strap or vacuum grip. I'll let "noose" speak for itself.

If you want to show a picture of how you wear it you will need to upload it into your album and post a link to it there. Pictures showing a penis, or nudity of any kind, are not allowed on the open forum.

Albums, Avatars, Pictures

[Tooltime Junior Member Find all posts View Profile Close Tooltime]

I have found using a piece of tensor bandage "cut into a 3/4" by 10" strip) as a wrap is the key to make this device very comfortable.

[Tooltime Junior Member Find all posts View Profile Close Tooltime]

Upload it into your album? I don't know how, But only was going show how I am wrapping , and what i use. If anyone wants to see. Just looking to help out.

[Cavalier Retired Super Moderator Member of the Month Feb 2015PEGym Hero Find all posts View Profile Close Cavalier]

Upload it into your album? I don't know how, But only was going show how I am wrapping , and what i use. If anyone wants to see. Just looking to help out.

Any help is very much appreciated here.

Click "My Account" in the grey bar at the top of the page. In the grey bar of your account page click "Photos". In there you can create an album.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

Trial and error and I guess this extender just will not work for me. The springs are so difficult to fully compress. Even if I manage to get it compressed and the noose tight I let go and the springs fully decompress so no stretch.

I feel it has to do with my large fat pad and small flaccid size. Out of ideas to make this thing work. I thought it was one of the easier extenders on the market.

I honestly have no idea what your problem is with the device. Are the rods even on both sides? There should be no problem compressing the springs! I've purchased two of the devices (threw one away due to marriage issues) and neither have been an issue. Also follow the instructions! There is an introductory period where there won't be much tension on the burrito. This is meant for you to get used to wearing the device. If the pictures on my profile and the instructions and picture here don't help, I don't know how else I can help you. Are the springs even in your device? Did you order the device lff the website or from a third party source? Are you sure you have the quick extender pro? No of your posts with your issues are making sense to me.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

when pushing down or compressing the internal springs or the springs there is 3 springs? or marks? how much is the first mark or second or third mark equal in tention. i know its 3500g total, but how much should i push down, or how much springs should i cover or push down to to get a specific tention, i am a beginner and i dont know how muh tentions i should i apply

You're making this too complicated. Follow the instructions for the sizing and initial rods and stick to the program. As I have said in my previous post, there will not be a lot of tension applied initially. Please just trust the program. This isn't going to happen overnight. There is an adjustment period.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

Appreciate all tips I have read in here, have had device for almost 2 months now. Unfortunately haven't seen any gains but then again have not seen any gains with any other products I have tried either. Will keep with it and hopefully see signs of progress soon. Curious, does anyone use their bathmate and then use the QEP right after?

I just started wearing the device again a few months ago and at just under 3 months I saw my first gain of .15 inches. I am now 7.75". It takes some time for your body to adjust to the growth process. Stay the course and make sure your noose isn't slipping and there is moderate tension at all times while wearing the device.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

This what I have. <link removed>
[ATTACH]102240[/ATTACH]

That is not the Quick Extender Pro but congrats on your gains!

[Reapso Senior Member Find all posts View Profile Close Reapso]

I have figured out the device a little more. The biggest issue is that even with doing the measurement the DVD says when I let go of the spring it has no compression. I have read this entire thread and from what I read if the springs are not keeping a bit of tension it is not working.

There is a stretching feeling when it's on but it is very hard for me to put on. It also wrecks my glans. I have a small flaccid and a large fat pad. 6.5 BPEL but a 1.5 to 2 inch fat pad. It's very difficult for me to get the straps on an keep a cotton bandage in the correct place.

It also causes my glans to turn purple and cold fairly quickly.

It might just be my anatomy that is giving me issues.

I bought the device from the actual retailer.

[Ultimate Burrito Moderator Member of the Month Oct 2017PEGym Hero Find all posts View Profile Close Ultimate Burrito]

I have figured out the device a little more. The biggest issue is that even with doing the measurement the DVD says when I let go of the spring it has no compression. I have read this entire thread and from what I read if the springs are not keeping a bit of tension it is not working.

There is a stretching feeling when it's on but it is very hard for me to put on. It also wrecks my glans. I have a small flaccid and a large fat pad. 6.5 BPEL but a 1.5 to 2 inch fat pad. It's very difficult for me to get the straps on an keep a cotton bandage in the correct place.

It also causes my glans to turn purple and cold fairly quickly.

It might just be my anatomy that is giving me issues.

I bought the device from the actual retailer.

The springs won't be compressed during the initial phase. You are gradually working up to the max tension. Thats why you add rods fairly quick initially. The main thing is to learn how to wear the device properly first. The infant sock helps better than wrapping.

Once again the springs most likely won't be compressed until you add enough rods but be sure you follow the program. You will risk injury if you try to apply too much tension too soon.

[Reapso Senior Member Find all posts View Profile Close Reapso]

I will give it another go. I did try an infant sock but it caused significant slippage. I will keep experimenting until I figure it out.

Thanks for all the feedback and I will post back of I have any other issues.